Chosen Solution Because of my mistake I I deleted Partition Recovery using “ MiniTool Partition Wizard “ The device was still working But when rebooting, a blue square appears in the center No Bootable Device.Hit any key Hi joBAR, You will have to manually perform a recovery. This website details what you have to do. You will have to create a bootable Windows USB drive. You can find how to do that here....
Chosen Solution Hi, I changed my keyboard as the volume button had a mind of it’s own. However found that the computer at first would not start up. I detached and reattached the keyboard ribbon which fixed it however a few keys were not working. So I decided to disconnect the battery while the mac was on to re-adjust the ribbon. That is when the MacBook decided it rather RIP, the only sign of live was the mag lite when connected it was green but only when it was connect the battery indicated showed the battery had charge....
Chosen Solution Nothings happens when I plug my micro sd card into my laptop. It has worked before, same card same laptop, I moved ALL my pictures from my laptop to the sd card and everything was fine. I was able to work with any picture, the card showed up under my computer like it’s supposed to. Than one day it just didnt work. Nothings pops up on laptop when micro sd card is inserted, nothing under my computer....
Chosen Solution I dont have a heat gun thing people use to liquefy the adhesive though the back glass panel, are any alternatives that i can use, and no one has made a list of ways to open up a back panel. Best way by far is to use heat to loosen the adhesive. A heat gun is going to be the best way to go however if you have a good hair dryer you might be able to get it hot enough to melt the adhesive....
Chosen Solution I have tried everthing..it was fallen on the floor last night by mistake..but after that it was okay..and now it’s full black..its not out of charge..This would be major problem,plz help. You sure the phone isn’t actually on but no display on the screen? This usually happens and it ends up being the screen needing to be replaced to fix the no display but on issue.
Chosen Solution Phone turns off at about 95% can turn back on but once on lock screen will turn off again, gets hot when using it on the charger, have had it apart previously- any ideas? The part where it’s getting hot is normal as it is constantly rebooting. The battery will need to be replaced. You have a few options on getting a battery replacement, either by: Doing it yourself (DIY)....
Chosen Solution how many shims are there on the motor armature at the bottom end near the control board? I have removed the armature from the housing and I am not sure how many shims there were. thanks Bill24 Hi @bill24 , According to the parts list in the service manual (see p.25-26) there is a small packing washer - part #184, one large shim washer - part #183 and a nylon armature washer - part #186....
Chosen Solution i want to start a study and practice in fixing and repairing,i am newbie, please guide me ,witch tools are best and i should buy for start work not professional? @stackprogramer it does not matter what model you will work on, the basic tools are pretty much the same. Start off with a set like this. You will also need a hot air gun (no link since it will depend where you live) and a good work light as well as a magnifying source....
Chosen Solution Just bought a new charger for my tablet and I need to know the polarity setting for the tablet. Wendy, most of the Iconia Tab use a barrel adapter for their power supply. Most of them have a 12 volt DC power output. The outside of the barrel (called the Ring) is negative and the inside (called Tip) is positive. Check your model and let us know so we can answer this specifically to your device....
Chosen Solution Power Macintosh G4 500 DP (Gigabit) M7893LL/A* Wouldn’t power up a couple of months ago. Randomly one day after several weeks I hit the power button and it was fine. Have used it 4-5 times over a couple of weeks since then. Tonight after about 3-4 minutes it shut down as if the power cord had been pulled. It will not power up. I was using a browser when it happened....
Chosen Solution A friend has this camera and so do I. We both have the image size set on RAW and L. My photos have a high resolution of 6000 x 4000 and hers are at 640x427. We cannot figure out why her photos are so small. Would this be a camera defect? That resolution isn’t even possible with that camera. However, 640x424 is a supported video resolution. Are you sure your not looking at the video setting?...
Chosen Solution My iphone 7 plus is water damaged from washing it. I did it because my speaker wasnt working, i thought my iphone 7 plus is water resistant so i tried to wash it from a tap for a few seconds. It worked fine initially, but its now stuck in a boot loop and something in the screen is spreading. What do i do???? Hi, The phone has an IP68 rating but that was when it left the factory....
Chosen Solution I try to connect it but nothing, and when I connect to it from the charger in pc or plug, shows no sign of life!? Can i do something? Carlos Gomes, not sure if this is your iPod or if you just got it or what exact model you have. The first thing you want to do is to change the battery. That way you will have a starting point and you will know that it works....
Chosen Solution keyboard just quit working a couple weeks ago and do not know why I just had the same problem. I did everything. powered off and on and that did not work. but then I hit the power button for the screen to go off, not power off, and then I hit it again and when the screen came on the keyboard started working. Not sure if this is the FIX, but it worked for me....
Chosen Solution My Led TV screen turns on but doesn’t work. The lighting inside makes it look like its shattered but it’s not. Any suggestions? @juan18 let us know what make and model your TV is. You also need to let us know what you mean by “screen turns on but doesn’t work.” This could be a main board issue (if the backlight comes on) or a panel issue. This is what really confuses me “The lighting inside makes it look like its shattered but it’s not”....
Chosen Solution The screw through the bearing into the rotating palm handle on my Mahi driver came loose. It looks like the only way to repair it is to get a hex driver through the handle from the nose end. How can I get the magnet out so I can reattach the palm handle portion? I am comfortable pressing it out but am hesitant in case the steel tip unscrews or there is another way....
Chosen Solution My Maytag Bravos washer will only spin and drain cold water. When I do a load in hot water it stops before the spin cycle and won’t drain and give me a LF code. Any help will be appreciated. Washer is only a year old. I’ve checked all the hoses and there’s no clogs. Jason Wilson, Error code LF is low fill. Your hot water isn’t flowing into the washer fast enough....
Chosen Solution Dear Mr/Mrs; My phone (Xiaomi 5S) dropped into the water, now its not working touch and showing lines. Is it just need to change LCD ? Hi, As you know water and electronics and electricity are not a good mix. The minerals in the water cause corrosion and the water also provides circuit paths for the electricity which were not in the phone’s operating design and could damage the components....
Chosen Solution So one day i was just playing as usual, i turned on my ps4 went to sleep. The next morning i turned it on then it was not turning on like the blue light turned on for a second and turned off. I kept on trying and same thing occured everytime. I tried changing the power socket and Hdmi nothing seems to be working. Any help? This question has been answered already My ps4 won’t turn on And there’s a video about it here»>...
Chosen Solution My Battery died and I need a Replacement. I’ve got the Version with the two AA Batteries and I don’t want so solder myself to get a new Batterypack. Is there one ready to buy available? @styrkjar not sure how your AA battery pack was created but this one should work. However, for the price of it I’d be learning to solder pretty quick to save the money. Not pretty but this could work....
