Chosen Solution Hello I would like to replace my screen and keyboard . My laptop is Lenovo y50-70 model name 20378 When I write down my serial number on the Lenovo site I found an lcd cover and lcd panel My first question is do I have to replace my cover as well as my panel? The damage is on my screen only and I think there is no damage to the cover....
Chosen Solution So the power button on my Macbook A1502 13’ mid 2014 does not work. The thing is it does boot as soon as I plug the magsafe in. If it is running the top row of keys do not work, except for esc. Allother keys are working fine.I tried to sort out if it is a logicboard or keyboard problem by shortening the power pads on the logicboard and nothing happened....
Chosen Solution GE microwave door does not open reliably when pressing the release button. It takes a few pressings before it engages. Hey Alan, Google exist, do you know ? I googled for 3 seconds and I found someone who coincidentally posted the same question with the same microwave. I give the link: Door will not open after pushing door button Do as mayer say do not attempt repairs on microwaves its really dangerous....
Chosen Solution my break lights wont turn off even when the car is completely off.. Ive tried unplugging battery and that didnt do anything. please help! chelsea, check your brake light switch. It is possible that it either stuck or that it needs to be replaced. No. 5 is the stop light switch (brake light switch) Here it is on the pedal assembly Hope this helps, good luck. I have an audi 2005 and breck light on left side in rear and in window come on and stay on at night when car is parked and off till i drive it during day and as soon asi park at night again they come on and stay on....
Chosen Solution Why My dryer doesn’t heat at all Cause 1 Thermal Fuse The thermal fuse is a safety device designed to protect the dryer from overheating. The fuse is located on the blower housing or at the dryer’s heat source such as the heating element on electric dryers or at the burner on gas models. The fuse should be closed for continuity meaning it has a continuous electrical path through it when good....
Chosen Solution I have a GE Cafe refrigerator with hot water dispenser. When I try to use it, the LCD screen says Hot Water disabled. Anyone have any ideas? I am trying to avoid a service call. I have replaced the filter already. Update (12/30/2017) cye22tshss You need to enable it. Usually you touch and hold the hot wat button on screen for 3-5 seconds. Or go into the settings on the touch screen....
Chosen Solution My Panasonic tiera tv blinks 7 times . I just tried the unplug trick. left it off for 5min . No luck.What does the 7 blink mean? maryloudicarlo for Panasonic in general the cause for 7 blinks are usually: Driver SOS2 (SU/SD Connector DET) (SU/SD Scan and Logic IC) Most likely an an SU/SD fault but could also possibly be a loose board connector, or a mis-seated connector leading to the panel....
Chosen Solution The right side usb port on my macbook pro isn’t working , not even a thumb drive is recognised , the left one though works fine. please help what can be the reason and possible parts that can be faulty. Any liquid damage? Does the HDMI output or SD card readers work? The right side ports are on a separate I/O board that can be independently replaced. If the HDMI output or SD card reader works but not the USB port, you probably need to replace the entire I/O board: MacBook Pro 15" Retina Display Mid 2014 I/O Board Replacement and MacBook Pro 15" Retina (Late 2013-Mid 2014) Right I/O Board If none of the ports on the right side function you could try replacing the cable instead: MacBook Pro 15" Retina Display Mid 2014 IO Board Cable Replacement and MacBook Pro 15" Retina (Late 2013-Mid 2014) I/O Board Data Cable Replacing the cable is a bit of a cheaper repair so you could try it first, but if that doesn’t work then again you’ll need to replace that entire I/O board....
Chosen Solution for some reasons, my MBP’s SD Card slot won’t read… so I have to put the SD card inside a USB card reader, then it reads… Is there anyone who got this experience as well? Thank you… Update Thank you, I did take a torch (flashlight) and trying to find if there’s any bent, but I couldn’t see anything. By the way, when put alcohol, must I use a cotton bud?...
Chosen Solution Hello all, I have this issue with an iPhone 5s. The screen went blue a couple of times then after a while the device didn’t turn on anymore. I’d like to invest some time and money into trying to fix it, even if it doesn’t worth it overall, for the sake of learning. So, I checked the battery and when fully loaded the voltage seems to be fine. From reading other forums I found out that the main board or the logic board may be the problem....
Chosen Solution Hello, I have a client that brought me a water damaged (Creek Water) Moto G5 Plus (Verizon) phone. I am in need of a schematic to find some values of missing caps due to corrosion. try here, http://www.appleunlockstore.com/13/502/M… The only thing I could find was this. Not sure if it helps you or not, have a look.
Chosen Solution I just installed my new battery from you and phone wont come on? What can I do? Did you connect everything correctly? And did you unplug your battery first when changing, and then connected it after everything else? That is mandatory to avoid short cirtuits.
Chosen Solution My 2001 Honda CRV, just randomly wouldnt start. I was able to boost it 1 or 2 times, but now it wont crank or start. I hear a fast clicking sound by the battery and fuse box area when I try to start the vehicle. what could this be? Hi @jey95 , The clicking sound is most probably the solenoid associated with the starter motor activating, but there isn’t sufficient power in the battery to crank the engine....
Chosen Solution I have an M1 Macbook Air that was working fine. (It wasn’t dropped and there were no liquid issues.) I left it running for a few minutes and when I came back the screen was black. I have tried several things to fix it including checking the power, brightness level, reboot, reset NVRAM/PRAM, I was able to connect it to an external monitor where it works fine. Connected to the external monitor I started it up in recovery mode and ran the disk utility....
Chosen Solution Ive got a rather weird issue with a IP7. Works fine with all aftermarket screens but tried 4 oem (direct from original phones) and none work! Anyone come across this? TIA There’s no obvious reason why OEM screens wouldn’t work. You may have a received a bad batch of OEM screens. Can you cross-check the screens on another device to see if the problem is specific to the phone or screens?...
Chosen Solution Hi all I have a PB here with a P key not working. I’ve replaced the scissor mechanism but the problem is that the springy rubber nipple is damaged. When I press on the contact underneath, it does type Ps with apparent contentment. I found a source at http://www.irithm.com/Mac.key.replacemen… with pretty good instructions, but, while they can provide the nipple, they don’t say how to install it. It appears to be glued onto the keyboard base....
Chosen Solution after doing a hard reset the touch screen is still unresponsive. also when it was dropped initially about 10 hours ago the left side of the screen had a tiny crack. any ideas on what could be broken? Screen or motherboard? any help? Jack Nicolsen you cannot make the determination without working on it. The number one give away on here is this “dropped initially about 10 hours ago” and " the left side of the screen had a tiny crack" You have a failed digitizer....
Chosen Solution Pictures added to the internal frame memory from an SD card do not upload to the kodak pulse account, ie they do not sync. Everything else works, pictures send by email , etc The online account only shows the pics I sent by email not the ones added to the internal memory from an SD card. If anyone has any idea why this happens I would be grateful for any advice, many thanks...
Chosen Solution I was scanning a page in that unfortunately had some sticky stuff on it and a part came out stuck to the paper in the mechanism in the top: This is the part: I’ve been trying to work out where it belongs and how to put it back in, but I’m stumped. Any ideas? I worked it out. It goes on the bottom part, as shown in the attached pic....
Chosen Solution Hello everyone. Long time lurker, first time question asker. This community has been great to me over the years. I mostly replace iPhone screens and other easily addressed issues on iPhone for family and close friends of family. So this community has been very helpful with some of those things. I recently was given a 27in Cinema Display from a customer of mine (from my actual job). He was about to throw it out because “it’s just a black screen”....
