Posts

Chosen Solution Just noticed that my nfc isnt working when trying to use apple pay. I replaced the battery myself last week so Im assuming I damaged something during the process. What should I start with checking or replacing? Thanks You may have inadvertently damaged or not re-assembled the NFC bracket next to the Screen Bracket. Check out this guide, specifically steps 30-31. I had replaced my iPhone 6S Plus battery (2750 mAH) with that of 6 Plus (2915 mAH) since both have the same connectors....

Chosen Solution I have replaced a cracked digitizer on this iPad previously (and have done this on a number of iPads so I have some experience). This time, it cracked from being dropped on a hard floor. I noticed that the power button had also stopped working. I didn’t bother to attempt this repair this time. I pulled the cracked digitizer off, no issues, plugged the new one in, replugged the LCD in (which had worked just fine), and there’s apparently no power to the LCD....

Chosen Solution Hi, I followed this guide. I have problem with my earpiece speaker after i reassemble my screen, it doesn’t work and i should talk with the speaker, why it happen and what should i do??? Tanks. Hi Ali, 1st and foremost, why did you need to change your ear speaker? What happened? Was the old ear speaker working at all before? 2nd, to get you started, and if you were not hearing any sound to begin with, may be the ear speaker mesh is dirty....

Chosen Solution Hello friends! So I have a problem. I replaced my iPhone battery but then my home button stopped working. The touch ID still works. It’s not 100% responsive but it still lets me in my phone. The home button does not work at all! I thought the home button cable was damaged so I replaced it with a new home button but still, not responding. Does this mean I need to get a new dock connector because the home button connector is damaged?...

Chosen Solution After replacing the battery and plugging the phone into the charger, it showed the Apple logo once, then just shut off and nothing more happens. It doesn’t get recognized by iTunes either. I already checked the connections of all the ribbons. I read some people saying to check the APN but the battery I received doesn’t have the APN written on it anywhere. Old batter was APN: 616-0434...

Chosen Solution I was using I Pad powered it off as usual. A couple of hours later went to switch it on screen is lit but no instructions show to key on our ask for passcode, just blank grey screen. Any suggestions? Thank you………….. Force restart How to Force Restart an iPhone 5 I realize this guide is for the iPhone 5, I assure you the principle is the same

Chosen Solution For some reason the number 6 keeps appearing in my emails even when I do not touch it. How do I prevent that from happening? Here is an example: “Thanks for the update As6 of. 10:30 a.m. I. S6end her so ma6ny6 good. Wishes. Dad6 Hi @gegraha , Does it only happen in emails or also when you use different apps requiring text input e.g. browsers? Has anything been spilled on the keyboard?...

Chosen Solution The graphic NVIDIA GeForce 8600M GT is known for being defective http://support.apple.com/kb/TS2377. Applecare now says that the repair extension is over. Is it possible to find such cards and is the replacement not too difficult ? All the best AF I have recently seen repair services on eBay for the Nvidia issue at $90.00. I have not yet used this device, so I can’t recommend it yet, but at that price, I intend to do so....

Chosen Solution After I replaced my iphones6s broken screen it started to overheat when charging and charge percentage will decrease really fast, like from 40% to 15% in about 3 min Josselyn Lagos, Found this info. on your issue searching the net. Overheating problems after screen replacement, problem could be bad battery/damage to the battery connector or perhaps a power IC/component on mother board loose or damaged. You will have to disassemble phone again and check battery connector/motherboard and inspect for damage pins on battery/motherboard connectors and for damaged loose components....

Chosen Solution Bare with my grammar please. My phone (iphone 5) started restarting last week, january 2. After 3s-5s the phone will restart again and it happen so many times. The “restarting” will only stop if i plug the phone in a charger or power bank. And last january 5, friday night, my phone is in the stage that keeps restarting in apple logo. Yesterday i search a lot of videos about “restarting in apple logo” and the videos says i need to connect it in itunes and need to Update or Restore....

Chosen Solution Ok so I have a weird issue with my IPhone 7plus, whenever I record with my back camera, there’s sometimes no or very faint audio. But then later in the video the audio is fine?? And sometimes it’ll switch between the two on one video. The iPhone 7 model is prone to audio problems. It could be due to a faulty part or worse the audio IC chip. I suspect your problems are due to a faulty mic on the dock flex assembly....

Chosen Solution Hi. I have a late 2009 iMac fully specced with i7 from apple when it was new and i have upgraded the ram from 8 to 16gb. It is starting to be a bit slow, so i would like to upgrade the processor. Any suggestions? I want the best possible one. The best CPU this series had was the i7 2.8 GHz. There really isn’t anything better that will work in your system....

Chosen Solution I have tried to power on and restart the laptop but the display still does not show anything but a black screen. Ar Chavez could be a bad LCD or a bad GPU (part of your motherboard) Start by attaching an external monitor. If that one shows your images than you know the issue is with either your LCD or your motherboard. Get the hardware maintenance manual for your computer from here....

Chosen Solution Today I noticed a tiny spot at the bottom left of my iphone (see img). About 1h later a second expanding stain appeared, top left (see img).. I have a few questions: what could be the reason? any advice to stop it from expanding? Will opening the phone make things worse or may it help? is the only way to fix it an LCD replacement? If so, is this what I need to do?...

Chosen Solution I have an Xbox 360 elite and I put in a game and it says play DVD. Idk what it’s wrong with it I don’t believe it’s a laser issue because I took it out of a working Xbox. Please help kel, you do remember that"The Xbox 360 is designed so that the DVD drive works only with the particular game console it is installed in. Replacing a defective DVD drive with a replacement DVD drive does not work, since the replacement has a different DVD drive key, which the game console won’t accept....

Chosen Solution I received an eyeclops bionicam that doesn’t seem to work. I would love a manual to assist with fixing the issue, how can I go about that? Hi @lanabrown , You could try contacting the manufacturer and ask if a service manual or schematic diagram was available, even if you have to purchase it at a reasonable cost. I wouldn’t hold my breath on this one, but it never hurts to ask, the worst they can say is no....

Chosen Solution I have no sound except for what comes out when headphone jack is being used. No ring, no text, no music, no clicks - Nothing! I have replaced the dock connector - has not corrected the problem. Not sure what to replace next. Perhaps the Speaker Enclosure? Volume button is not on vibrate and indicates Ringer Volume, not Head Phone. Prior to replacing the dock connector after reading numerous information online suggesting this may be the culprit, I did all updates, reset to factory setting, etc....

Chosen Solution Why won’t my phone sound with text and message alerts? It rings fine Hi, To change the incoming message tone go to: Menu > Settings > arrow right to Profiles > Edit > Message Tone There are a lot of other personalisations that you can change in Profiles > Edit e.g. Voicecall ringtone, Silent, Keypad volume, Keypad sounds, Ringing Type Update (12/17/2016) Hi @Vern Smith, I cannot find a T93 listed on the ZTE website, but here are the procedures for a T930 and a T90....

Chosen Solution How do I begin to figure out what to repair? It was dropped in the bath tub and won’t turn on. How do I start? What do I look for? If your willing to tear it apart you can start buy completely drying it out then bathing the logic board in isopropal alcohol and cleaning all the contact points were any connectors snap together. bry off the battery and clean the connectors....

Chosen Solution A couple of months back i had changed my Tv And lost the power lead to the Ps4, when using a standard kettle lead and hooking up to my new TV, there became faults First was the power button, which i replaced then the Optical Drive (Ribbon Cable ) now it powers on but doesn’t show an image I have checked the HDMI lead and port neither are broken Anyone have any ideas ?...