Posts

Chosen Solution On my alcatel 5041C can hear people just fine but people cant hear me when I talk. when people talk on the phone i can hear them, but when i talk people cant hear me or its static. but i hear no static on my end? I think it’s to do with the setting that there the wrong audio setting if so how do i change them? Hi, Try using the headphones with the microphone attachment plugged into the headphone socket of the phone and check that you can be heard OK when on a call....

Chosen Solution If one liquid spull indicator on the battery is activated (red) does this mean the whole battery needs replacing? (The other 4 are white) I would REALLY appreciate an answer! :) Your drink has sugar & acids in it which over time will corrode things. The number of LSI markers that have turned on you is not what you need to focus on here. You need to clean what was spilled (even if its already dried)....

Chosen Solution When printing from any programme, ie Photoshop, Photo Viewer etc I am only getting 5 paper size options and there is no option for user defined size. Can anyone help? Hi, What OS is installed in your computer? Are you using the OS generic drivers for your printer or have you installed the specific Epson L555 drivers / software relevant to your computer’s OS. Here is a link to the Epson driver support page for your model printer....

Chosen Solution I have changed out the bulbs, but one will flicker sometimes but it never stays on. Can it be fixed, or should I replace the fixture. Open it up and check for loose wires. Use a multimeter to test for continuity.

Chosen Solution I am trying to get a Samsung P2770FH monitor working. The power supply was bad (about 5V output instead of the expected 14V) so I ordered a replacement. Now the monitor powers up, but under certain circumstances it will power off, then back on about every eight seconds. Depending on the signal, sometimes it will stay on longer, but usually power cycles within a minute. Any common things I might want to check before I declare it dead?...

Chosen Solution Please give me bcm5976 data sheets, or directly instead BCM5976 IC program?I want to IPAD MINI Touch screen driver board. thank you Heres the Chipworks info on the chip bcm5976. Here’s ABI research info on the chip bcm5976. Both need payment for there research if that is what you want. As to getting the part there are many who offer it online. The problem most people face here is they need to swap out the chip....

Chosen Solution I’m working on this MacBook Pro that had water damage. It actually boots up and seems to work pretty good. I just have one issue that I’ve found…the left shift key does not work. All other keys do. The keyboard has been replaced already with the same symptoms with both keyboards. While searching for anything on the board that might be the problem I came across some missing & damaged components....

Chosen Solution Would love to ad a picture. When you install new printer cartridges they move to the right and then back to print mode when you close the lid. “They” are not moving back to print and “stuck” on the right hand side. I love this printer and agree with the description you posted. I have extra ink cartridges so would love to fix the printer and keep using until my ink drys up!...

Chosen Solution After I replaced my glass screen the digitizer has become dim. I can see the apple sign when I turn it on. And when I try to turn it off I can see the X button where you would exit powering off. What do I do? How dim is the screen? Make sure the brightness is turned up. Make sure the connector are properly connected. You could try a soft reset....

Chosen Solution My iPhone has water damage, changed the battery, worked for a while? so basically my iPhone has had water damage which was brought from online. i changed the battery the phone ended powering on until the battery lost its charge then never turned back on. Anyone have any idea or solutions ive tried a new battery with a short time success. I have just changed the charging port also....

Chosen Solution Lately, my Keurig Elite hasn’t been making full cups of coffee, and just today it finally decided that it no longer wants to brew anything at all. I’m at a loss… Is this thing salvageable? I had this problem and called the Keurig support number. They helped me fix it. Your tool bag for this project is a paper clip. First, take out the plastic holder that holds the K-cups....

Chosen Solution Cheap nondell charger, had to get a new in a flash when the old one just - ¤%&/() and some smoke stopped working. My old hero, XPS m1530, now makes it brrrrrom. I was hoping it to be my analog to digital music converter. Thought it would be good for transforming my LP, MD, CD, tape-player to digital format. With the noise its not possible. I am handy, and got a soldering bolt....

Chosen Solution It went into water then i took it out then when i press the power button it turns on and then immediately turns off itself by itself without me wanting it to turn off it basically i turn it on and it turns off by itself Hi The water causes corrosion and provides circuit paths for the electricity which were not in the phone’s operating design and could damage the components....

Chosen Solution My LG 21FS4RG-TS fails to turn on when you plug it and try to turn it on the red light comes on but with a second it goes off and does not work. @bernardas12 sounds like a power board issue. Unplug your set and remove the back. take a look at all the boards, pay particular attention to the power board. Check for any leaking or domed looking cap....

Chosen Solution Need to install a blade guide to my Black and Decker, modal JS660 jig saw. I purchase a blade guide and tried to install it but was unable to figure it out. I’ve looked on line for an instruction sheet or a video but could not find anything. There is not a service center in my area. I could send it to Black and Decker for repairs but I would like to attempt to repair it myself first....

Chosen Solution I’m trying to remove and transfer the front camera assembly on my broken screen to the new screen and the repair guide that comes up for the United States version repair guide, the instructions in the steps are in Chinese. Where do I find the US/English version? All references to this type of repair in all the guides come up in Chinese. Thank you ifixit for repairing the repair guide ;)...

Chosen Solution I just replaced the top LCD screen and after putting it back together it wont turn on. When I press the power button all I get is the 3D comes on then goes off quickly. The motherboard seems to be getting power but just wont turn on. HELP!!!!! Take it to a dark room and turn it on. Watch the screens carefully. See if either of them flash. If the bottom screen flashes then there is probably a problem with the top screen....

Chosen Solution A while ago I opened up my brand new (never powered on) 2018 Mac Mini, and following the guide here I swapped the base RAM for the OWC 64GB upgrade. After putting everything back together, I hooked up the Mini to my Apple Thunderbolt displays. When I hit the power button, the front LED lights up but there’s no image on the Thunderbolt displays. Furthermore, after about 30-40 seconds the LED turns off and the fan makes a brief “woosh” sort of sound....

Chosen Solution I have a Galaxy 10.5 (SM-T800) that I picked up to repair. It had no power when I bought it, battery was below 3 volts so I replaced that first. Left it to charge overnight and found that the battery’s voltage had not change. I can’t get it to power on at all, tried hard reset with the buttons (Power, Volume up, Home) and no response. Tried multiple chargers and cables they all work, swapped the motherboard with another SM-T800, though I can’t know if that one is any good either....

Chosen Solution Hello all, I have an iPhone 6s, it does register that there is a SIM card but says no service. Bluetooth and WiFi are working fine. I replaced the rectangle cellular antenna found in the top left of the phone, and no difference. I also replaced the charging dock and again no difference. Tried searching for networks, however nothing appears. Does anyone have any ideas? Thanks for your advice!...