Posts

Chosen Solution Hello. i have one major problem. I Got samsung smart tv which turns on if i plug it to the to the wall socket. It shows smart tv logo than sometimes displays source EXT.(but no number) and NO TIME INFORMATION but not every time. Beside that it shows energy gauge in the right bottom corner. From this point it’s stuck. No picture just that gauge and that sign, you cannot turn it off with remote or button on the tv....

Chosen Solution I have a pulled pad on an iPad pro 10.5 charging port. I don’t believe any has ever been able to get their hands on a Schematic or BV for this model. I need to run a jumper from the connector but not sure where to run it to. Can anyone help? With no available schematics or BV, you will probably have to find the connection spot yourself. Generally speaking, the charge port is always connected via a test point underneath the logic board....

Chosen Solution First of all the original problem points to the NVIDIA issue and should be covered by a extended 4 year after purchase warranty by Apple. The geniuses should know about that. The only thing with your new board i can think of, as you seem to have checked everything obvious, is the DC in connection under the LB. Hope you didn’t get a fishy board. I had the same problem....

Chosen Solution I broke the screen and replaced it with new one with frame, now the earspecker don’t work and on the screen i have always the hands free icon, also when i plug the back cover the phone don’t turn on. Go back and tear the phone apart then clean the connectors with 90+% IP alcohol and a soft toothbrush. You should also make sure any rubber insulators are in the right place so when you put the back cover on your not shorting anything out....

Chosen Solution I have a HP 2159m display and it won’t longer display any video, It won’t show on device manager but it seems that it know that it’s being plugged in. Display: HP 2159m PC: Asus Gaming TUF FX505DT Typically, being plugged in is determined by a wire in the cable being grounded when plugged into a monitor. In order to show in the DM, the computer queries the device....

Chosen Solution My wife’s macbook hit the floor about a week ago, and since that the screen isn’t working. It works fine with an external monitor and everything passes 100% using Apple Hardware Test. I’ve already used a flashlight to see if it’s just the backlight, but it has no video at all. At this point I’m about ready to replace the whole screen/lid, is there any way to know for sure that’s the issue before I do?...

Chosen Solution Cleaned all paper feed rollers. Pick-up rollers not picking up the paper Hi, This link may be of interest to you. Scroll down to the post by ‘jambro’ (6th one down) for a description of a possible fix http://h30434.www3.hp.com/t5/Scanning-Fa… The typical problem is associated with the cog sliding out of position along the drive shaft. This cog can be viewed by placing a mirror (facing upward) just within, and to the right, of the paper feed tray to view the drive shaft (running right to left) above the compartment....

Chosen Solution Can the zipper be replaced or ordered for a tailor to replace. Chacabucco style in black 2 teeth along the zipper are missing and zipper has come off track. Hi @shoefitz , Patagonia will fix it for you, either for free or for a reasonable charge. Check out their Ironclad Guarantee Lookup Patagonia in your location

Chosen Solution Hi, The phone is an Iphone 5 and was in a apple logo boot loop, after some reading i ordered a battery from ebay and installed. The area on the motherboard under the rear camera where the screen connectors go gets hot within a few seconds of connecting the new battery. It will boot up and run fine but the phone gets very hot. I did some testing with the screen disconnected and battery connected its hot, disconnected the other connectors at the top of the motherboard and still hot....

Chosen Solution Hey all, The Nexus 5 no longer gets a signal with the SIM card in. Tried the SIM in another phone, and it works fine. The IMEI is recognized on the phone, so I think it’s a hardware issue. Is there a part I could replace to fix this? I’d prefer to keep this phone instead of ordering a new one. Thanks! edit: I should add, WiFi works fine, and it even says “No signal....

Chosen Solution I’ve seen similar questions, but no definitive answers on them. I received an iPhone X that worked all except car play after having a drop of coffee spilled in the charging port. I couldn’t find any solution to this software wise, so I replaced the charging port. I gave the phone back and now the phone seems to keep restarting after a minute or two. I tried all the possible software fixes and they didn’t work, I also looked at the board and it still has all the black covering on it so I couldn’t see any issues with it....

Chosen Solution I dropped mine and it has a crack in the back on the bottom left corner so im assuming it landed there. It is completely unresponsive. Its basically if i had taken the battery out. Any ideas about what that could be and if i could possibly get to it easily? Hmm that’s a mixed bag of answers. If you wanna work on it yourself, loads of testing to be done, and considering you’re getting no response at all, you’ll want to try with a new display....

Chosen Solution When try to turn off phone turns back on starts to load then just spins Hold down power and volume down until the screen changes. Use the volume buttons until the little window says “Start.” Then click the power button. Hope this helps!

Chosen Solution I already have a post about this on Apple Discussions, but i want to ask around here. https://discussions.apple.com/thread/798… So to shorten it, when turning on the mac, i hear the chime happen, fans are spinning, but there is no video, and i cannot do any type of key commands, no PRAM, safe mode, nothing. So i THINK i might have a dead logic board, but i am wondering if anyone else has heard of this issue?...

Chosen Solution Installed new HD and after I did the restore of Time Machine with my external HD. On the reboot I keep getting a message saying “You need to restart your computer. Hold down the Power button until it turns off, then press again.” The screen turns green with a bunch of words and numbers. Some of the words say, Mac OS version: Not yet set. Don’t understand most of it....

Chosen Solution So I have an iPhone 8 Plus, which has a home button that is behaving abnormally. A screen replacement was conducted. During the iOS upgrade (the Apple logo and progress bar screen), the home button would click normally. Upon reaching the Hello screen, it stopped clicking. Setting it up towards the Touch ID section, I get the “Unable to read this fingerprint. Try again using a different finger.” However, after that messaged, the button started clicking again....

Chosen Solution My PS Vita got wet and no longer works. What part can I replace to fix? Is it the entire motherboard or maybe something else, please? Thanks! Don’t jump ahead as buying parts without looking at what parts you need first and if any need replacing at all. Follow the step-by-step Guide. get a high % of the alcohol the higher the better and a soft brush and scrub the board’s clean of any corrosion....

Chosen Solution I bought a replacement battery for my GamePad a few months ago, and it doesn’t charge! What should I do? I don’t even have the email receipts or original packaging, either. Nevermind, it wasn’t plugged in lmao

Chosen Solution Hi, i went swimming with my iphone 4. I dried it out but it will not power up. I have a lot of pictures and contacts on the phone. what would you suggest to be able to extract these? New Battery? Thanks for looking. Paige is very correct about power speeding up the corrosion process so do not try turnning it on. I am sorry to say but do not do put the phone in bag of rice....

Chosen Solution I bought kindles for my daughters, and one of them already broke the charger port, it isnt the cord, it works fine. I would just like to know how to replace the charger and the level of difficulty also the supplies I will need. Thanks guys! federico, here is my answer to a similar question “disassemble your Kindle. Follow this guide. You should check the solder connection on the micro USB port....