Chosen Solution Please help me the resistor is missing and I don’t know the value @doriansom, R8C33 is a zero ohm resistor (5%) on the SMBUS_CLK line, according to the schematics and parts list for the Xbox One S
Chosen Solution I spilled water on the MBA 13 Late 2010, and 4 keys dont work. Everything else is fine. I found a suitable replacement here:http://www.partsquad.com/pc-mac-parts/ma… Is there anyone that would like to make the repair? Thanks, Chris Here’s the guide for doing this yourself: MacBook Air 13" Late 2010 Upper Case Replacement It is pretty involved. Are you sure that’s all that’s wrong with it. iFixit doesn’t actually do repairs, they just show you how....
Chosen Solution Hi, Please can someone help me with the gears? I received my bike on the 28th of this month and I have successfully upgraded to latest firmware. The problem I am having is on the 2nd gear when i pedal it feels like it is skipping, it is not pedalling smoothly. 1st and 3rd gear seem fine and don’t skip. Any ideas how i can fix this? I notice the yellow dot in the nexus gear is not in the correct lines....
Chosen Solution I recently had to open up my Unibody A1342 due to water spillage. As I was following your teardown, at step 10 I seemed to miss something. Whilst trying to gently pop off the speaker wire connector I must have used too much force and it just snapped off. I cannot see any way to simply click it back in, does it need soldering? There doesn’t seem to be much metal to solder together, is there another option?...
Chosen Solution All of a sudden my dyson dc14 stopped working. When you turn it on, it starts fine, but after about 2 seconds you hear a loud hiss (air) and all of the air is directed out of the tiny vent above the filter. Everything is clean and seems to be connected properly. Could something not be air tight? I’m out of ideas. Thanks!! There are two maintenance guides that you might go through....
Chosen Solution I have a 27 inch iMac type EMC 2429 on which I have exchanged the video board After reassembling the system the fans started making a lot of noise. After taking off the screen again, I noticed that there is one connector missing. It is not attached to the mainboard. Before I start taking the mainboard out, I want to know which connector is missing. I have a picture of the board and where the connector should be....
Chosen Solution I am working on this Toshiba Satellite M45-S165 laptop. I replaced the motherboard about 2 months ago… and it is now returned to me with similiar symptoms. When I press power on, the screen stays black and the power light will flash green (and sometimes stays on) and the fan will run. usually the fan will kick on and run too. I have tried a hard reset by holding power button without anything plagged in, and no luck....
Chosen Solution My iPhone 6 bought on eBay came without a screen which was an easy replacement but then the battery was bad so I also replaced that and after that it was working. I decided a couple of weeks later i should apply the adhesive under the battery because it was working great and i could sell it. When i went to turn the phone back on it took a long time to boot up and when it booted up the battery was at 1%....
Chosen Solution Hello, i have a customer who needs the digitiser and lcd replaced on an ipad air 2 wifi. i noticed upon receiving the ipad, that the home button felt misplaced/stuck. it didn’t work at all, didn’t click and felt like only the top half was moving, while the bottom part was sort of stationary. the digitiser was obviously replaced prior to this time, since it came off unusably easy....
Chosen Solution What parts do I need to order from ifixit (besides the tools)in order to replace a cracked screen on an iPhone 5s? Follow this guide. Order this part. Follow the guide very carefully. Always disconnect the battery, keep track of your screws (VERY IMPORTANT) and once the phone is open, never apply force. Everything is very delicate.
Chosen Solution This iPhone 11 sustained a forceful drop from standing height resulting in a shattered display glass. I replaced the display and when plugged in I get the below icon (battery with one red line and no lighting bolt). I rechecked the connections and there is no visible damage and connections are good. Ive tried the following: different charging methods and cordscleaned the lighting portresetand plugged into computer with iTunes....
Chosen Solution What is the rating 6.3 amps? and where to buy Hi, Here is a link to the fuse that you want. http://www.amazon.com/QUALITY-T6-3AH250V… If this supplier doesn’t suit you, just search for 6.3A 250V slow blow fuse ceramic. (Fuse designation T = Timer - slow acting F = fast acting. AH = ceramic, AL = glass)
Chosen Solution My iPhone fell in water. Although it was only in for a second it still suffered water damage. However, the phone has worked just fine. There’s only one problem. It will shut off randomly. It appears to shut off more if I’m using it versus if its just left alone. Obviously this is a short somewhere? I’ve taken the iPhone apart and tested the battery in another iPhone. The battery works fine, takes a charge and holds a charge....
Chosen Solution I have about 20 C720s that have the same issue. I try and turn them on and the power light flashes and then nothing. I have tried the following: Refresh and power - does the same thing as just hitting the power button Esc Power Refresh - does the same thing as just hitting power I suatered the super secret button and before you say that’s probably the issue....
Chosen Solution Printer is ejecting paper without printing. Hello! Most likely - you need to replace feed roller and retard rollers there. You probably can order them online. I’ve been replaced them on Epson 1410 model, but that was long ago. Epson printers are well-known for their exceptional printing services. Epson printers are not without their faults. Today we’ll be discussing the Epson printer printing blank pages error. How to fix it using the easiest methods....
Chosen Solution It’s summer I went in sardaigne It was very hot, the air conditioning worked The evacuation of the condensate must be stopped, because the water has infiltrated into the passenger compartment Can someone tell me where the exit of the drain pipe is and how to get there? Thank you very much There is usually a soft rubber hose that drops down below the vehicle under the firewall I do not advise pushing anything up through this tub as it goes right up to the evaporator and you could possibly damage it....
Chosen Solution Hi guys I’d bought a Dell’s AMD version of inspiron 15r laptop about 3 years ago. I have been experiencing a very annoying and frustrating problem since last few months. While I was doing some work on it, the screen went black all of a sudden. It happened once few hours prior to then, and force rebooting had solved the problem at that time, so I calmed myself and did a force reboot....
Chosen Solution Microwave specs: GE® 30" Built-In Double Microwave/Thermal Oven JTP90DPBB. This microwave is just 1.5 years old. The light in the microwave goes on and off as the door of the microwave opens and shuts. The light is also on when you put in cook time etc. The power shows 10. But the food inside does not seem to be getting cooked. The last time I used it for heating up a glass of water in a glass container-which worked....
Chosen Solution my says i should insert sim when the sim is inside already. help please frank, start by removing the screen assembly, iPhone 3G Display Assembly Replacement, clean the sim card reader with a high grade isopropyl alcohol and a soft brush, something like a toothbrush will work. Once it is cleaned, check for bent contacts. sometimes just bending the contacts slightly up can correct this error.
Chosen Solution I was kayaking and my Iphone got a little wet but it was not completely submerged. The phone worked fine and I even made a call on it a couple minutes later. After an hour or so I tried to get back on it and the screen would not respond to my touch. I held down the power and home button down and the screen turned black. I put it on the charger but nothing happened....
