Posts

Chosen Solution So I am using my calculator after almost 10 days. When I clicked on for first time it got on and then the blur menu screen appeared, clock icon in center and it got black (it disappeared). After few seconds it starts up again on its on and same process repeats. Have you tried reinstalling the OS? That’s typically a reliable fix for boot loops. Texas Instruments TI-Nspire CX OS Replacement Edit: if you’re relying on a software called ndless to run games or programs (you’ll know if you are), then don’t get the OS from TI’S website....

Chosen Solution I just replaced my iPhone 7 screen with one sold from ifixit. Everything works fine, front camera and Touch ID are flawless. However, I get no sound from the ear speaker. Is there any easy fix? If it had a preinstalled front camera assembly you may consider swapping the original one with the new one to rule out possible damage on the connector socket. You either got a defective part or something went wrong with replacement....

Chosen Solution My laptop is plugged in and showing its charging but actually its stuck at 0% and only working with power attached You must test your power adapter in another laptop. If this cant help. Please reinstall Windows. If all this solution doesnt work you must change your battery.

Chosen Solution my screen was unresponsive and i restarted it multiple times it didn’t work when i did that so i took apart the phone and disconnected everything . after that i connected everything back and i couldn’t even turn the phone on If you connect your phone to an iTunes enabled computer, does iTunes recognize your phone as being connected? If it does, then your problem may be backlight related....

Chosen Solution Please help me, i want Gpu x818337-004 or x818337-005 for Xbox 360 Slim in Cheapest price.. Thanks in advance.. Ammad Ejaz, try the same place as for your south bridge.

Chosen Solution How do I change the battery? Should I change the battery? @ptronme possibly your battery or your charging port/cable. If you checked all that already I would at least consider changing the battery. This video should be close to your model. If not then post images of what your tablet looks like between front and back cover. For that use this guide.

Chosen Solution I have a mid 2012 MacBook Pro 13" After the HD crash I bought a new 500 GB SSD. I put it in an external caddy, attached it via USB to computer and cloned the hard disk by recovering from the old disk using disk recovery. SSD will boot while in the caddy but not when installed into the laptop. It is possible to access the files on the SSD while in the laptop but if I boot from the HDD in a caddy or from a USB Boot thumb drive I cannot see the SSD in the set startup disk menu....

Chosen Solution Hello, Recently I got a 3ds - The small first version. When I plugged it into the charger, I noticed the light turn on, but when I try to turn the device on - nothing! The lights turn off when I press the power buttom and after a few secounds - turn on again without the decive coming to life. theres no crack on the screen. Thanks you....

Chosen Solution Hello Guys! This is an advanced question. iPhone SE NO backlight and NO image. I have already replaced every components on the backlight line (filters, diods, IC) The Original screen is working for SURE (tested it) Mainboard connectors are all tested good. Phone works, and boots I know because when I plug in the charger cable the charging sound comes in. What is the next step to do to further investigate?...

Chosen Solution Removed the cover on SM-T813 and replaced battery. Put cover on, plugged in and battery is charging. The battery icon shows % is increasing. When I push power button, tablet does not start (no Samsung logo). Are there instructions on putting the cover back on in a certain order. I noticed some connections on the cover. With help from @oldturkey03 , I realized I severed the flex cable attached to the power/volume connector when I removed the back cover....

Chosen Solution My radio just quit working one day I started my car (even with the key in the accessory position). The time is not being displayed (even with the key in the accessory position). The 7.5 amp radio fuse appears fine. I heard a buzz when I turned the key from the accessory position to start. Any ideas? Thanks! Hi, Use an Ohmmeter to verify that the fuse is OK (pull the fuse out when you check it with the meter) or replace it with a known working same rated fuse....

Chosen Solution Hello guys I have problem phone can’t read sim card I did change some parts I mean sim card reader and antenna also coaxcial leads as well didnt help at all . Is anyone have any idea how can I fix my phone please help me ? I had new sim card as well put in phone clean booth ways still not working No idea what device. No idea what carrier or unlocked device No idea what sim card....

Chosen Solution Hello IFixit, I bought a new LCD frame assembly for my Samsung Galaxy S4 I9505. Screen works fine, but the left + right button on the bottem of the screen are not lit up and not working. I tried my old flex cable for the buttons. They work and lit up aswell. My thoughts now: 1. Faulty softkeys flex cable 2. Flex cable is not working on the current version of the phone....

Chosen Solution Need help. I have a brand new d5300. Everytime I Remove the battery and put it back on, I get the message to set the date and time. I have tried leaving a battery inside the compartment for 5 days (battery is not fully charged though). I still get the message to set date and time. Pls help. Thanks @bryancarpo there is a backup battery (capacitor) that provides power to the clock chip which keeps your settings when you remove the camera battery....

Chosen Solution My Phillips LCD 42" was purchased in 2009. A few months ago randomly the TV would turn off or rather screen went black with no sound but TV was still on due to electricity noise and white power button was still lit. I’d turn TV off and on again and it’d be fine. Then the burning plastic smell started also randomly. Both issues became more frequent until a week ago when I heard a loudish pop crackle fizzing type noise and TV turned off accompanied by the smell....

Chosen Solution Hello there, I’ve started refurbishing and repairing various smartphones like iPhones, Galaxys, LGs, Huaweis etc… and I was looking for an answer to this question: Are the polarizer films the same for every smartphones (inches apart)? For example: can I put an iPhone 6 PLUS polarizer on a iPhone 5 LCD (by cutting it with a sharp knife or a scalpel)? By doing this we (refurbishers) could buy a package of 50 or 100 polarizer films for iphone 6 plus and apply them onto smaller screens....

Chosen Solution My 13" MacBook Pro is just over a year and the problem occurred 2 weeks ago. At first, it suddenly showed message “Are you sure you want to shutdown your computer?” shortly after the machine started. It kept showing the message after 20+ seconds even the “Cancel” button was clicked, as if someone has clicked the power button. A hardware test was performed with the original disk and no problem found....

Chosen Solution Hi does anyone have a board they can look at , is there a component missing from my board to the left of the cap above tristar chip , see photo . Board is 820-00180-B thanks . The limited boardview on zxw seems to show it connected to F6 of tristar and to the processor . I have looked at both a WiFi & GSM version of the logic board an I can confirm that there is no component next to the large cap....

Chosen Solution A SuperDrive equipped PowerMac G5 running OS-X Tiger will read and burn CDs, but won’t read DVDs. Upon checking the hard drive “partitioning” scheme, it shows that it’s formatted with the older Apple Partition Map - not “GUID”. Could this be the cause of its inability to see DVDs? If I also re-partition the Hard Drive as GUID and upgrade the OS to 10.5 Leopard, will this solve the problem?...

Chosen Solution I have led light 1 on, which i know is trickle feed, so that’s fine. I have tested the voltages on the power supply, but they don’t change when i depress the on button on the imac. i have put in a new power supply and get the same result. is the second power supply dead as well or is it a fault with the logic board? thank you for any help...