Posts

Chosen Solution Hello, Starting from about 6 months ago, there is a sudden noticeable lag when I am trying to open heavy programs and running games. However, the computer’s boot speed is not affected. My computer is about 4.5 years old. Here are the specs: Intel Xeon E5 2660 V4 2.0 ghz 14 cores G Skill Ripjaws 4 series 64 gb (8x8) DDR4 2400 ASRock X99 Extreme4 LGA 2011-v3 2x GTX 980 Ti G1 Gaming 850 Watt EVGA Gold PSU Crucial 1tb SSD (OS installation & Sketchup) WD black 1tb HDD (games) I ran the same Sketchup files and games on my laptop (Asus Zephyrus M gm501) but there are no issues....

Chosen Solution So with my iPhone when plugged in to charge and turn off the screen, about 20-30 seconds later it won’t be able to turn on anymore, force me to unplug the charger to make it power on and show apple logo, even plugging in lightning to 3.5mm adapter will make it suddenly shutdown. Does anyone here know if this panic full is related to hardware or software failure?...

Chosen Solution Took my 2017 samsung j3 (sm-j327a) to a repair shop to replace the battery. Original samsung battery specs were nominal voltage 3.8V, 9.88 Wh, charge voltage 4.35V, 2600 mAh. The shop gave me a Duracell CEL11669G which is 3.8V, 8.4Wh, 2200 mAh. Is it safe to use this battery in my phone? @roborachel, that can be an issue in some cases; for example I have a drill that runs on Ni-Cd (nickel cadmium) batteries....

Chosen Solution I replaced the screen on an iPhone SE (including front camera/earpiece/sensors etc), but used the original home button for the Touch ID. I have since tried to turn on the phone. I have not had any response from the screen. There is no image on the screen (new, old and also a spare screen), there is no sound from the phone (not even in earphones) and also I am not getting any vibrations when switching the mute switch or plugging in the phone....

Chosen Solution The screen was changed out. Now the phone won’t display anything. Even if I switch back to the old display. Is the phone recognized by iTunes? If yes, then based on what you say, I suspect that you blew the backlight circuit on the logic board. To confirm, plug your iPhone into an iTunes enabled computer and shine a bright flashlight on the screen. If you can see a dim image, then the backlight circuit is the issue....

Chosen Solution So after an issue with the phone not charging, I replaced the charging port (oem apple iPhone 5s from donor phone) , and the battery as the battery had decreased its ability to hold a charge. Rebooted phone and it is working, however after a couple of minutes of use it crashes with a blue screen for a second before restarting. I have researched this and the BSOD appears to be a different fault caused by the overtightening of screws damaging the 7 bus lines on the PCB....

Chosen Solution Reassembling the 4S I found this finger. It has some plastic insulation on it. It is brass/copper on the rear and is 5mm in size. I cannot however find it pictured in the guide. It does not look like the insulator between the Dock connector. I need to locate where it goes if possible. Thanks. This fits on the battery terminal - top of the 2 screws, under the battery and screw but on top of the Mainboard....

Chosen Solution I fix power problem. Power adaptor is faulty. How to get new power adaptor? Where to purchase? @lawrence57 check for a A9T80-60008 power supply. Places like this as well as many others have them .

Chosen Solution My iphone 6s has been disabled and says i need to connect to itunes. however when i attempt to connect the cable to my pc it does not charge or respond only vibrates 4 times. i have tried multiple cables and multiple pc’s. any help would be greatly appreciated thank you. You may have a faulty lightning assembly..I’d try replace that part as first thing, it’s between cable and board, would be the more reasonable and cheapest repair attempt....

Chosen Solution Hello all. I have a Frigidaire Model# FDB1500LFB0 and my problem is that… after loading and selecting my cycle and hitting Start, my washer fills with water to the (I presume) proper amount of water in the bottom. The water is very hot. Then the system stops, and the only thing that will happen after opening it after this (anywhere from 3-15 minutes, I did this several times.) is that when the door is shut back and cancel pressed it will drain as normal....

Chosen Solution My Model CUH1215a, the white destiny ps4, won’t accept discs. When I first turn it on, it will accept the disc, then immediately spits it back out. After that it will no longer accept the disc, and makes a constant eject noise. It happens every few seconds, as if it’s trying to push a disc out, but there isn’t one in it. Help? There are several things that can cause this type of problem....

Chosen Solution I would like to know if any one knows of a flip repair facility? I contact flip and I also followed the same instructions in youtube it worked for about 5 min and after i powered it off I was not able to turn it on again. Thanks I had them same problem. I would add that when I attached the FLIP MinoHD to my computer via its USB jack, the led on the jack blinked continuously, yet the device was not even acknowledged by windows, nor would it power on after sufficient time for a complete charge....

Chosen Solution How do i put my earpads back on ihip maniac high def headphones @shanahall ,Shana, could not find cushion install instruction for your model, most cushion install by wrapping around speaker cup housing and flange tucking in as you go. Links below may help by showing installation of Pad on a few different models. Good luck. I hope this helped you out, if so let me know by pressing the helpful button....

Chosen Solution My MBP only run smoothly when the fan is throttled, the problem is suddenly when i do some work, my MBP fan never throttled like it used to, it doesn’t have problem when browsing in chrome, but when i want to do some work using after effects the ram preview is taking so slow, can anyone answer why my MBP not throttled anymore? Fans are there to keep your computer’s CPU cool, but they need to be installed correctly in order to do it well....

Chosen Solution I bought a used 27 inch Thunderbolt Display 4 months ago, in good condition to connect it to my 2020 mac mini m1 with Monterey 12.4 installed. For the past week the monitor has been starting to switch on and off intermittently, often but not always when this happens the cable is very hot and sometimes the bottom of the screen too (without connecting anything to the hub this doesn’t seem to overheat)....

Chosen Solution In the middle of using my camera, it froze completely: the lens won’t retract, there is nothing on the screen, turning it on or off makes no difference, etc. - it is basically dead. I checked the battery and it is fully charged; I changed the memory card, with no result. I don’t understand what could have happened: it wasn’t dropped or banged or anything; it just quit. The only thing out of the ordinary was that my 3-yr-old granddaughter was trying to take pictures with it (with me sitting right beside her)....

Chosen Solution it bleeps and it says waterdamaged, how can i fix it Have seen this a few times and on every occasion it has been the Charging Flex Assembly. This is not too hard to do with the correct tools or any mobile repair shop should be able to complete this repair. Samsung Galaxy S8 I/O Daughterboard Replacement

Chosen Solution When I wannt too use my bluetooth speaker on his battries, He wont start Hi, The battery has probably failed. Here is the Ifixit guide on how to remove the battery in your speaker. TDK Life on Record A33 Battery Replacement

Chosen Solution hi, i just bought a new Lenovo Tab A8 from office depot, i got it for 15% less cuz they didn’t have the charger. they said i could use my micro USB as same as my android phone. but now it won’t charge at all, it shows battery drained sign, but never starts charging at all. i tried it with different micro usb chargers but no go. any idea on how i can fix it without spending money please...

Chosen Solution My washer just clicks when I try to start it and gives a Fdl report. It seems to be the door lock and if I slam it enough times it starts. What can I do to fix it? If you see “Fdl” or “Fdu” error codes, these are usually indications of a failed door latch assembly and will require replacement. Please give us your model number and I will try to get you to the correct part