Posts

Chosen Solution Our Kenmore HE3 stopped working recently when my wife put in a heavier load of clothing than normal. The washer is probably about 10 years old. During the wash cycle, the error code F 002 appearing (drain problem). The tub won’t fully drain now. At the same time part of a white hard plastic rim around the tub, connected to the washer boot and the tub, broke off. The majority of the hard white plastic piece is still there, but 50% of the circumference of it came loose or came off completely....

Chosen Solution Hi, I just bought a PS3 320GB from USA, its writed 120V on the side of the ps3 I decide to move to my home country there we use 220V Is it safe to plug it directly 220V ? LelRambo, the power supply in the PS3 Slim is a universal power supply to be able to operate 100-240V 50/60Hz. For validation, check on here as well as many questions about that in this Answers section;-) Hope this helps, good luck....

Chosen Solution Kenmore 90 Series - the cold water cycle does not turn as well as the Softener cycle isn’t working Here’s a really excellent video on this repair: https://www.youtube.com/watch?v=c5r49nuM…

Chosen Solution Whenever i plug my controller in, nothing happens. My PC doesnt recongnize it, and there is no signs that it is charging. It used to flash a red light and then turn off until it started being unable to turn back on. This embed seems invalid. Please check the URL. Ciban Og2 - Meme Channel first thing to do is to replace the battery. After that re-evaluate. this is obvious a no-power situation which may be exacerbated by a bad battery....

Chosen Solution My Keurig shows out of water but will not draw water from the reservoir I had this problem because there was air in the line so the pump couldn’t prime. I solved my issue by filling the reservoir about 1/4 full and placing it back on the machine. Then I basically lifted the reservoir up and down rapidly and saw little air bubbles coming up from the place where the water intake is in the bottom....

Chosen Solution My lcd tv has cloudy screen with white patches. When I tried to remove them, the top plastic layer seems to be coming off. The bottom layer is good and I can see the contents of tv but the top layer is cloudy. Please advise a solution or if it requires replacement of screeen. @saf1979 based on the image you posted it looks like a bad LCD panel. I’d be looking into replacing the LCD panel....

Chosen Solution So I just cleaned my carb and cylinder and replaced the piston along with putting on new rings. I can get it to start but it wont idle. Im working on getting the mixture tuned correctly but the only way it will run is with the choke open all the way. Not sure what the problem is. it will run but its not doing its best. Any tips or tricks to fix this?...

Chosen Solution My Lg47lb5900 tv keeps blinking on and off. It’s not the power supply. Any other suggestions? It’s only 2 yrs okd @rburke26 if your screen does something in spite of the new power board which includes the backlight circuitry like this there will be an error with the LED backlight strips themselves. These are replaceable but it is not easy since you will have to dismantle the panel. Post your panel number, not the TV’s model number so we can try to find the right strips for you....

Chosen Solution I have a redmi note 9 SE and its not here i need to change camera lens and battery I’m unable to find any guides on it, but i found a replacement part for the lens and the battery https://www.ebay.com/itm/124228428503?ch… https://www.ebay.com/itm/144518895066?ch… I’m pretty sure the lens replacement is the same for most phones, and the ebay listing says that the battery for the 9 is the same for the 9 se, so i would think that the procedures are very similar....

Chosen Solution My PS4 Network Port is failing. I have checked my cables with a network cable tester and I have replaced the cables just because I don’t want it to be a system issue. So now I took apart my PS4 and checked the network port for cracked solder joints. Or anything strange looking. Found nothing. So now I have cleanly removed the port. I am looking for a replacement and it seems impossible to find a replacement port....

Chosen Solution The person that had a company phone has left and reset the pass word how do I get the phone operational? I hate to be the bearer of bad news, but you can’t get it operational again without that persons apple id and password. This is a “security feature.” Its called an icloud lock. To avoid this they needed to have logged out of the icloud on the phone before they reset it

Chosen Solution I have recently bought my Lenovo A7600-H and i’m having problems and i can’t charge it with my samsung charger. But when i do charge it says ’no command’ i’ve been so sad since then. You may want to replace the battery and hope for the best . If you did fry it by using the wrong charger it may have been only the battery that got damaged ....

Chosen Solution “no line” shows up on my vetch handset 1 as well as handset 2. . I have plugged and unplugged. . . .tried everything. . .unhooked jacks, etc. Hi, Unplug the base station and any other device plugged into your telephone line. Can you get dial tone where the line comes into the premises by connecting and using an old style corded telephone? If you can get dial tone then perhaps the cord to the base station is faulty or the base station itself is faulty....

Chosen Solution Hello, This Asus FX505DD-DR5N6 *is barely used. I plugged it in and it seemed to turn on right away, but then I shut it down and I couldn’t get it back on. I unscrewed the back and unplugged the battery and CMOS battery and pushed the power button for 20 seconds to drain all residual power. Upon plugging it in (before screwing everything back in) I tested it by plugging it into the wall....

Chosen Solution I’m not getting any power from the unit. No display either. It’s just dead. Any suggestions? Cause 1 Line Fuse If too much current passes through the microwave circuitry, the line fuse will blow. If the line fuse blows, the microwave won’t start. To determine if the line fuse is at fault, use a multimeter to test it for continuity. If the fuse does not have continuity, replace it....

Chosen Solution I have a Macbook Core 2 duo. It was working perfectly with the exception of the display going dim. I took the case off to inspect the inverter cable. When I reassembled it the green power light on the wall cable is barely visable and it will not power up. No Fan, nothing! Any ideas what I may have touched? I did remove the cable to the keypad. It was reinstalled....

Chosen Solution Hi, yesterday I dropped my phone while charging, a pretty small distance (about the height of a bed), however, it landed on the back and made a weird sound. I picked it up, everything was fine except the home button was irresponsive. I turned it off and then entered an infinite loading screen boot. Tried to update it and restore it several times on itunes and finally it restored....

Chosen Solution Hi, in my MacBook, the optical out is always on, as long as I don’t have anything in the line out. Headphones just work well, but if I unplug the headphones or external speakers, my optical out will turn on and so the internal speakers of my Mac Book will still be turned off. Is there any way to fix this, without replacing the whole logic board? I already tried to reach the little contact in the line out that keeps the optical out on, but without success....

Chosen Solution So on wed afternoon I dropped my phone getting out of a cab into a pile of snow it was in an otter box but there are gaps where water can get in. Fast forward to Sat morning a neighbor had found the phone when some snow melted he turned on the phone and it had 7% charge he called my dad and I eventually got it. The phone died the man had taken it out of the case and dried it off and tried to charge it but it wouldn’t turn on....

Chosen Solution So my old LG G4 (H815 Factory Unlocked) isn’t playing ball with my Boyfriends 3 Sim. The phone is confirmed Unlocked and I’ve been able to use my GiffGaff sim in the phone which further confirms it’s unlocked. However it refuses to accept a 3 sim (Both my new 3 Sim; his and one from the store) I’ve tried factory resetting the phone a number of times, rebooting, opening it up and inspecting the prongs....