Chosen Solution My phone is stuck with an image of the charger and the iTunes logo.At the top of the screen it then says support.apple.com/iPhone/restore can you help please?? Try getting you device out of recovery mode and see if it boots. 1. Unplug the device from the USB cable. 2. Hold down the sleep/wake (or Side, depending on your model) button until the iPhone turns off, then let it go....
Chosen Solution The device will accept a charge from power supply, it indicates full charge, but the battery will not charge the inserted phone. How to fix? I fixed this issue by replacing the lightning connector that attaches to the iPhone 6. I will post step by step and photos later.
Chosen Solution I have a SonyDCR-TRV17 camcorder using a mini DV tape. When I playback a tape, it shows the video but there are evenly spaced solid grey horizontal stripes that blank the video. So it’s a line showing the video, on top of a grey blank line, then a line showing the video, in top of a grey blank line, about 10 lines in total. I put in another tape to see if it was the tape but it’s the same thing....
Chosen Solution My old pro is broken - think motherboard .. Removed hard drive - could I use this old pro as a keyboard and display for a Mac mini ? Thanks j Sadly there is no easy way to re-use the keyboard and display for your Mac mini. By the time you did it it will have cost a lot more than buying a keyboard ($20) and 18" display ($130)....
Chosen Solution Surface Studio has a great touchscreen but an outdated GPU, CPU I am thinking if I can remove everything in the base and custom build the PC (by increasing the thickness of the base). I watched the teardown. Do anyone know what kind of connector is used for the monitor? And what kind of additional/unusual ports/adapters are there in studio motherboard The whole platform firmware is custom, therefore you will not be able to use any Surface-specific features, mainly the touchscreen....
Chosen Solution Being the only physical button for power, lock and screenshots the button has become more unresponsive to gentle presses and now requires a great pressure to activate it. Is there any way to fix it before it’s too late? Hi Damien, It could either be the (visible) button that needs to be replaced or the power button switch (small circuit board). Both can be ordered, e.g. on ebay (button and switch)....
Chosen Solution I made an adapter power cable, but I wired it backwards positive to negative. Now with a correct wired power cable the green light lights, but the unit will not power up when pushing the on/off switch. What component is most likely damaged and can I replace the damaged part? Try just holding the power button for 15 seconds. This is supposed to reset it. I can’t find a schematic, so I can’t pinpoint the most likely cause, but look for something burnt if holding the power button doesn’t work....
Chosen Solution My power cord for the laptop has become sensitive and I don’t know what to do? The problem could be your laptop, the charger, or the power source(Plug) See if your charger has faced any damage, if there’s anything in the charging port or if you wall plug won’t give out power anymore. If it’s the wire I would think it’s best to find a replacement for safety.
Chosen Solution Mac Pro mid-2012 This machine has been cutting out periodically for about a year. There are two problem areas. Firstly it cuts out when put to sleep. Secondly it cuts out randomly, perhaps after several weeks untroubled usage. It’s very unpredictable in this respect. To get round the first problem I changed the energy save settings to let the screen sleep but not the computer [moving the pointer to ’never’]....
Chosen Solution See video for details. It basically starts up with a bright white light and then turns into vertical lines. It also sometimes displays 5 lock screens vertically. I have already tried a soft reset, but it had no effect. Do you still have the original screen in a somewhat working condition? If so, try the original screen and see if this problem persists. That way we can rule out the screen....
Chosen Solution Not Connecting to computer via usb cord. Hi, If you used the same cable on all your Kimbles to connect to a computer but only the older one doesn’t connect this at least proves that the cable is OK. It may be that the charge port enclosure has lint or other debris in it preventing a good connection on all the pins. The data connection pins are pins 2 and 3 while the power pins are 1 and 5....
Chosen Solution My problem: When i download in torrent or in browser or installing anything, my GAMING laptop runs bad. This are the symptoms: The cursor runs in lag, the sound is intrerupt for few secounds again and again, and all my laptop runs bad. I note: I have all updates up to date (Windows 10 Pro build 1809), all my drivers are installed and up to date, my laptop is very protected of viruses, periodic defragmented and the disk is cleaned up....
Chosen Solution During the past few days I have noticed that my phone screen is starting to pop off a little on one side. I have noticed that my keyboard doesn’t always click the keys I need. I’m using my hotspot so the blue bar is up the top and it keeps opening up the settings when I’m typing or scrolling down something. Please help this is really annoying me...
Chosen Solution I dropped my tablet on a wooden floor and now it won’t turn on Hi @isznad , Do you get any indications at all on the tablet if you connect and switch on the charger to the tablet? Have you tried turning it on with the charger connected? If it is not responding at all you may have to open the tablet and check for any obvious damage or loose connections....
Chosen Solution my tablet was working fine,then my screen went black,it still has power,the battery is fully charged,please help me You can try press the power on button and the volume up button for a count of 5 and release and then press both in again. This often happens after a firmware update. hope this helps
Chosen Solution Please help me identify the part (transistor) marked in the attached picture so I can replace it. Thanks Mise à jour (21/02/2020) Another view of component onlogic board Ok, i found it . SSM3K15FV
Chosen Solution Hi, I have a big problem with my macbook pro late 2011 with mac os 10.7.5. The problem is : no audio device detected. So i did all possible solutions found in forums but with no result. If any one had the same problem and he found solution plz shar. You could try a USB Audio Dongle..(adaptor). USB audio runs on different chips… if the adaptor is discovered it would have line in/out ports… BTW some of the adaptors are also microphones....
Chosen Solution I was on my laptop yesterday and they worked fine, but then I had to restart my computer and now the USB ports won’t work and I’ve tried everything suggested nothing worked. At first I thought it was the mouse so I tried another one and it won’t work either in any of the USB ports, what if one of them broke and it made the rest unable to work...
Chosen Solution So I just replaced my old swollen battery in my laptop with this new battery: MacBook Pro 15" Retina (Mid 2015) Battery Is it good for the new battery if I keep the laptop plugged in its charger all the time? I.e. use the laptop as a desktop? TIA. This usage should be fine. I would, however, recommend plugging out the laptop and using the battery until the percentage indicator gets to 30% about once a month....
Chosen Solution I use NET 10 as my provider in AT&T & Verizon coverage areas. The Note 4 N910C was described as compatible with AT&T 4G LTE coverage. When I received the N910T2 phone, however, it was an unlocked T-Mobile phone, and the website description was that it was NOT a fully compatible phone (not sure if that meant with AT&T, or even with T-Mobile), but at any rate, we have NO coverage for T-Mobile here....
