Chosen Solution i replaced the cracked glass lcd screen assembly on moto e 4 plus. it turned on, had 18% battery. I checked operation by using maps, linked to my yahoo email etc. it all was working. i left phone alone and when i returned the batter had run down. when i tried turning on the yellow triangle with red exclamation mark inside circle with small red mark indicating 0 battery came on....
Chosen Solution Red blinking light not working Hi @nanbar , Has it worked OK before? If it has never worked and if you have a Uniden Dect 6.0 1760 phone, have you set up the Voicemail service with your landline phone service provider, you didn’t say? Go to their website to find out how to set it up. Be aware that with some providers it’s a subscription service. Here’s a link to the user manual for the above model phone....
Chosen Solution I can’t open mobile without charger .. when plugged out charger phone switch off not opening .. again i plugged charger phone opening … automatically power off and on when plugged in charger .. phone 88% charge battery notification bar says.. what is the problem battery or charger ??? I need answer Hi! So (correct me if I’m wrong), the phone stays on, only when the charger is in, right?...
Chosen Solution Recently my iPhone 7 Plus started not booting up after a housing replacement, first I thought it was the housing it self so I put it back in the original. Still had the issue, then I started in plugging something this maybe something might of gone bad after moving it to another housing but nothing seems to help until I unplugged the antenna near the cameras, the one resting on top of the flash....
Chosen Solution Hi recently (before Christmas) I bought a second hand p20 lite for a very attractive price. Then the issues started. The selfie camera got covered in dust very quickly. The phone loves acting up and slow down when I need it the most. But most importantly recently it hasn’t been charging very well. I’ve tried different charges and nothing helps. Finally the piece of rubbish just decided to stop charging....
Chosen Solution Why did my nice dark screen turn white And turn my pictures nto negatives Screen color changed from original color. my pictures look like negatives now. I cant get original screen back. I have tried everything. There are lots of well meaning posts saying Just uncheck negative colors. Thanks for trying, but it’s unchecked. This happened on it’s own. Same with dark mode. Same with high contrast. Same with color adjustment-all OFF....
Chosen Solution Does anyone know the pinout of the camera so I can make a USB cam out of it? Here’s the situation, I have a Mac mini and an Acer Monitor, along with an isight out of a dead iMac. I want to put the camera on top of the monitor (not in, on) and plug it in to a USB port. Thanks for any help. I have made a couple of these out of Isight G5 Camera’s...
Chosen Solution Is the any possibility to exchange the plastic cover of the Display if it is scratched? Old ipads hand glas instead of plastic :-( Ok, sorry. Seems to be very thin glass…even if it feels like platic :-) But thanks for the answer. Klaus Hi Dan, Unfortunatelly the new ipad Air is plastic covered on the Display . This is the reason why its so light :-) But also more scratch sensitive…....
Chosen Solution I have a 2001 grand caravan, I’ve have it wrk on ,put on a pump…it still has probs..took it backto shop, bcz of my reservoir losing fluid..they took it in claim tighten stuff..it still leaks. asked up front if they check hoses to make sure they were good.. oh yes… I knew then they we’re lying.. I live small town can’t find honest mechanic.. being woman they take advantage....
Chosen Solution So this is how it is, I have a PS4 which is from Japan that I wanted to use here in the Philippines. But, underneath the unit it only says 100v~2.5a, I just wanted to know if I can use it in a 220v? If there is someone who has a unit that has the same label and used it in other volts. btf.tristan “The power supply is rated at an AC Input of 100-240 volts....
Chosen Solution Please my Canon power shot A2300 won’t snap when I turn the flash on and the flash won’t flash but the red eye light will on @bangalee this could be caused by a bad flash capacitor or a bad flash assembly. Use this guide Canon PowerShot A2300 Flash Assembly Replacement to work on that.
Chosen Solution Hi, Guys! Please if anyone could help, I would be very thankful! Macbook 2.2 Santa Rosa A1181 does not boot. With battery installed, I connect Magsafe power adaptor then its lights turns green and when I press power button, nothing happens not even a noisy. Nothing at all; Without battery same issues occurs. Green light on magsafe power adaptor and nothing else. Only with battery: pressed power button and nothing happens; Tried to use another battery (that is surely working) and the same happens: light green on magsafe and nothing else; Tried to use another magsafe power adaptor that is surely working and the same occurs; Put the battery in another macbook and the battery does not charge; Without battery, connected magsafe power adaptor, green light shows up....
Chosen Solution hello guys, i have a problem with my old SP. it doesnt start, the only thing that i does when i switch it os is a blinking orange light and the screen also blink once. i tried it on the charger directly without the battery and it does the same thing. please help The blinking orange light usually means that the battery needs charged. If it is very discharged then plugging it in won’t do any good until you leave it plugged in for a while to let it charge a little before you try to start it up....
Chosen Solution I need a new power supply for Apple iPod Hi-Fi A1121—can I order here? Please help how to order and where, thank you. @feizalwu it appears as if iFixit does not sell parts for this device. Since the people on this forum are volunteers and not directly connected to ifixit, you could ask the iFixit sales staff. Use this http://help.ifixit.com/collection/130-co… to contact them. There are no schematics for the A1121 and replacement power supplies are very difficult to find (if at all)....
Chosen Solution My new puppy chewed through the Chromecast wire, and it was working at first because it was still slightly together and I used reg tape around it to hold it, but then it completely ripped apart when spouse unplugged from wall. So I am wondering if I should just buy a new one? Or in some way can I fix it and strip the wire and put it back together?...
Chosen Solution I have a Keurig that I was given for free, if I can fix it. It’s serial number start with a 76 but looks just like a K75. It pulls water in from the water storage, heats it up but does not pour it through to dispense it. I have checked the top pin that punctures the cup and it is not clogged. I have used a turkey baster and been able to suction out hot water through that top pin so I know that tube is not clogged....
Chosen Solution We put our iPhone 7 just under the sea water to film the fish now it’s water damaged on the screen it’s a funny colour what do I do ? Sea water is the worst and the chance of success diminishes significantly. You could apply the same steps I recommended to the original poster. Unlike threaded discussion forums, iFixit Answers is focused on addressing individual questions, preferably to resolution....
Chosen Solution My old (2006; now 2022) Samsung ML-2010 did not come back on after a power outage. The LEDs were flashing alternately: “On Line / Error” flashed red and “Toner Save” flashed green. There was a motor running continuously inside. Answering my own question about a “dead” ML-2010: The cause was a bad power supply capacitor (1500 uF, 10 V, 10mm dia, 20 mm tall) that was obviously “puffy”. This is the easiest printer to work on that I have ever seen....
Chosen Solution I’ve got a MacBook that the optical drive was removed from to replace the screen and motherboard. I was able to get a disc in and it reads plays fine, but upon ejecting, the top white part of the case is bent out which pushes the disc back in. I’ve taken apart multiple times but can’t seem to see what appears to be pushing the drive up so that it won’t eject properly....
Chosen Solution Getting ready to open up the V11 as the NO intermittent power switch trigger is having issues and will occasionally not turn OFF when released (in contrast to some of the earlier Dyson model reported issues). This appears to be a bad switch/connection under the red trigger button as it could be silenced by pressing to the side (which may have helped kick the button back up underneath). I am simply trying to do my homework here to see if this was a common issue or an anomaly, in case there was anything more nefarious that had been seen or reported by others....
