Chosen Solution Help!! I have replaced the complete screen assembly twice. The first time I was able to get a picture and some what of a response to the touch screen, but only if I held the screen in one hand and moved it around a little. The second screen one day old, only flickers (grayish screen) Also the phone will only come on if connected to a charger. I do not have a way too hook it to iTunes....
Chosen Solution As the title says, I can only power on the laptop if I… Remove the batteryConnect AC powerAt this point the laptop will power on giving the Novo button text and I can connect the battery, which works as expected. Why is this? Why doesn’t the laptop power on with the power button or novo button? Ok so at number 3, leave the battery disconnected. It is actually unsafe for the laptop to be on and have the battery installed while it is on....
Chosen Solution Hi, I just opened the front panel assembly of my IPad Air and I have a couple of questions. The LCD has some foresight material and marks on them, so what would be the best way to clean it up? Is it okay to use my eyeglass’s cloth for this? Also, when I inserted the battery isolation pick, I heard a pop from the logic board, is this supposed to happen?...
Chosen Solution Phone suddenly stopped functioning. It won’t take a charge. We tried multiple power sources and cables and got no response. Clean charging port with toothbrush. Try cleaning with bit of Isopropyll Alcohol. If still nothing, open iPhone, carefully disconnect batter connector and then reconnect it. See if this helps.
Chosen Solution My phone won’t reboot but displays the name of the phone and stays there just displaying that. What would be the problem?? Did you try to root the device and something happened during the rooting process? Or was it a failed software update? In any case, I would say the software has become corrupted causing the boot up failure you’re experiencing. You could try performing a factory reset from the recovery menu to see if it fixes your boot issue....
Chosen Solution my controller is not working after yellow light repair, it turns on and stays on but controller doesn’t work ,tried reset and 4 different controller but nothing , could I have a loose cable or something? PS3 Hi woody99, you can try with another cable, else if possible get a thumbdrive or misc, connect it up and check on your PS3 if it is able to detect it....
Chosen Solution Hello guys - I hope I’m asking this in the right place - I recently bought an old Logitech Audiostation s-0217a, in very decent shape, and though I could make use of my old iPod touch and make a nice audio system. The problem with the Audiostation is that its power cable is severed. It runs on +13V-1A, and I happen to have an adaptor with adequate power. The problem is the wiring....
Chosen Solution My PB G4 Ti 800 MHz will start OK, but after ten minutes of being using any application, it locks-up and I have to do a reset to get control o f the computer. Also I can only the lower slot for memory. If I install memory in the upper slot only, I get the tone as if no memory is in stalled. If I do not run any application the will not lock at all, but as soon as start an supplication the PB locks-u again :-( Update My HD is not dying it works just fine....
Chosen Solution My Apple MacBook Air MC233LL/A doesn’t want to recognize any USB devices after I updated the OS software through standard Update tool. Nothing’s working now, no mice could be recognized or any other USB (or mini-USB) device such External DVD-drive. When I plug something in, for ex., iPhone 3Gs, it shows that it’s charging, but inside the OS nothing’s recognized, no iTunes starts or whatever. How to shake the OS?...
Chosen Solution So in recent times, my drill has worked properly but this time I feel something is wrong with it because it is reacting very slowly compared to the other times I’ve used it. There are a few possible reasons for your drill to be slow, be sure to make sure you are fully compressing the trigger on the drill. If this is not the problem, another solution may be adjusting the clutch knob which has 11 positions....
Chosen Solution I have two Furbies and I am trying to get them to talk to each other but it’s not working. Furbies communicate with high pitched sound waves that aren’t audible to most people. This communication is very sensitive and will be difficult to pick up by the Furby microphone if there is any background noise. Try putting the Furbies somewhere with less background noise and this should fix the problem....
Chosen Solution I cleaned my keyboard with cotton and a liquid computer cleaner. It seems like a few drops spilled from the cotton into the keyboard. Te keyboard was fine because I started using my laptop after that. Around 30 minutes later, the Caps Lock started turning on by itself, then it would turn off when I pressed the Delete and Space buttons, etc. It got worse (qwerty would come out as q1w2e3r4t5y6) until, finally (the next morning), the first two lines of the keyboard don’t work anymore....
Chosen Solution I was using it the other night and it was rooted because I accidentally deleted an important file so I was trying to get it back but then my tablet reboots by itself and then It would not properly start up it would get stuck on the Samsung logo animation I have already tried to wipe the device and it still refuses to work PLEASE HELP!!! You just messed with some system file which are necesary for android os to boot , before doing any thing make sure you make an ndroid backup through recovery!...
Chosen Solution While trying to open my Sony Walkman NWZ-E453, I accidentally punctured the outer wrapper of the battery as seen below (Yes, I know that all the iFixit guides warn about this). It isn’t very visible in the image, but there is a small hole. Can I just put tape over the hole or do I need to buy a replacement battery? If so, where could I buy one (I tried to look for one but couldn’t find the right one)....
Chosen Solution I have tried a force reboot but it still doesn’t work I need help!! sounds like a bad digitizer consider replacing or invest that money towards a newer iphone Is this after a screen replacement the touch didn’t work, or did it just stop working the original screen? If it just stopped working, then you will probably need a screen replacement. Replace the screen.do not try it yourself if you are beginner....
Chosen Solution I am in the middle of replacing the iphone 4 home button. I the video, I am at the step where the sim card is removed. My verizon phone doesn’t have a sim card slot. Rather than proceed with the process, I was going to put everything back until I could get better directions. Unfortunately, when I picked up the phone, a small right triangular piece dropped out. It has a hole in it....
Chosen Solution I had a friend drop off his phone that had a charging problem almost 2 months ago and was out of charging since then, I repaired it with a new charging port and his phone still didn’t turn on at all or even show the charging symbol when placed on charging. Btw i’ve opened a small repair from home service and am just 18 so I don’t want to get sued if this goes to extreme lengths since it is his work phone....
Chosen Solution The agitator on this model seems to have 2 sections, An upper and a lower part. The upper half does not seem to agitate the clothes as well as the bottom. Cause 1 Agitator Repair Kit If the washer won’t agitate, replacing the agitator repair kit may solve the problem. The kit contains the agitator components that are most likely to wear out and/or fail. If any of the parts are worn out, stripped, or damaged, replace the kit....
Chosen Solution I’m facing an issue with WiFi grayed out, please let me know where the WiFi antenna sits on the device. i have all the tools required to open the device and re-construct i just wanted to know where the antenna exactly sits on iPhone 7! It’s useless to replace antennas with Wifi grayed out, that’s a board level issue that you can’t fix by replacing parts.
Chosen Solution Phone only rings sometimes with incoming calls - but does ring sometimes. You mean the actual ringing noise, when you get an incoming call? I would guess the loudspeaker isn’t working. You may also want to try and reset your settings first Parts iPhone 6 Loudspeaker Labor iPhone 6 Lightning Connector Assembly Replacement
