Chosen Solution I bought an iPhone 7 Plus with cracked screen when I put my SIM card at fist it works but 1 minute after the phone says no card sim I tried multiple times but the same problem appears Plausible cause. -Carrier Locked -Damaged Sim Reader, really difficult especially with Phones. -Carrier Settings need to be updated. *Leave sim in unit, connect to wifi, go to Settings > General> About....
Chosen Solution I bought a brand new amplifier and plugged in my Galaxy Note 3 as input using the jack port. Since then my phone has multiple issues, but the amplifier works with other devices. Maybe a short high voltage broke something ? Here are the issues : no sound at all coming from earpiece (loudspeaker works) distorted sound or no sound at all when using the headphones jack. Sound is less distorted when volume is at the max level headphones jack will only output sound for the right channel I tried replacing the headphone jack part with a replacement that i bought on Aliexpress but it didn’t work (no sound at all, even from the right channel)....
Chosen Solution hey guys, changed my screen and since no screen works, even the old ones i have. phone didnt charge or anything because i had a iphone 6s home button so i turned off everytime i plugged the home button connector inm, now i replaced with normal 6 home button the phone is reconized by itunes but no screeen at all works what could have happened? Just to confirm, did your original screen work (backlight, image) just prior to the repair?...
Chosen Solution Hello, I have a little problem with my MacBook. My logic board broke so authorized service repaired it in warranty and they as well replaced the lid and Touch ID. Now my Mac won’t go to sleep or wake up after closing or opening the lid. I tried to turn on AutoBoot in Terminal but nothing happened. Does the 2020 13” has the same lid angle sensor as the 16” and needs calibration?...
Chosen Solution My optical drive was replaced fairly recently and worked fine up until a few days ago. It opens and closes fine via the eject key on the keyboard, but when I insert a CD and try to use an application like Toast or Jam, the CD is not recognized. I also tried a music CD via iTunes, same problem. Is there a diagnostic utility that might give me a clue?...
Chosen Solution Where could I require a new carburetor, airbox, etc for my 1987 model Suzuki FA50 “Shuttle” moped? Hi, Here is a link to a supplier of the parts for a FA50 moped. http://www.cmsnl.com/suzuki-fa50-1985-f_… Scroll down to find and click on the carburetor link. A page opens describing the parts. If you click on the ‘more info’ link in the Carburetor Assy part on sale, in the box that opens is a product number....
Chosen Solution We did a screen replacement on a iPhone 8 plus, and now it does not have any touch. It is running on IOS 12 and we have tried multiple screen replacements with the same issue. Checked out the board nothing is bent and everything looks as normal as it should. Anyone else heard of this issue? Are you using an OEM/Original/Premium screen for the replacement? If so, keep on reading… The 7/8 series screens are made by several manufacturers (Toshiba, LG, Sharp) and each phone is calibrated to the screen it has installed....
Chosen Solution My Touch controller is suffering from the unstuck rubber pad behind the right trigger button. Is it possible to reach the area behind the trigger button of the Touch controller easily and/or without removing the top panel? No, you must removing the top cosmetic disc first and tearing down this controller. But this trigger failure can be easily repaired after taking apart.
Chosen Solution Following the great instructions here for changing my dead battery, I re-assembled my iPhone 3G and connected it to my mini to charge. All that came up was a white screen. When the phone beeped and I saw my phone on iTunes, I figured it must be a malfunction. I reset the phone but the screen still stays white (occasionally with black stripes like a bad TV set). The screen was working before I changed the battery....
Chosen Solution I have SanDisk ixpand 32 GB (2 years old) and a brand new SanDisk Ultra Fit 3.0 32 GB USB thumb flash drives. My problem is, both flash drives are always getting hot when I plug them in and do any file transfer. What can I do to prevent them from overheating ?Is this harmful to them ? Thanks, Regards. It is normal for a flash drive to get warm duing use....
Chosen Solution After being splash by water. My iphone X isn’t working correctly. The taptic engine malfunctioning. Same goes to camera, speakers and microphone. When i tried to volume up or open flash light the phone will lag and hang. Face id is still working. Same goes to screen. Does it mean anything happen like electric shock with certain mechanism ? Please help me asap !! Thanks guyss ! With water damage, you have to decontaminate the logic board before doing anything else....
Chosen Solution I just went to Apple service centre to discuss about my mac’s display replacement cost estimate and other options. Prerequisites: my mac’s display suffer from #flexgate. So I asked which new display assembly unit are they gonna use to replace my mac’s faulty display and they answered: we will use the same display of 2017 model compatible with your Mac and it will have 90 days warranty. Then I said: what’s the point in getting 90 days warranty if when I purchased my Mac, my default mac’s display lasted about 1....
Chosen Solution Visibly there’s nothing obstructing the pump, it was working just fine yesterday, any suggestions on how to fix this? Try this video, just because it worked yesterday doesn’t mean it didn’t just get something in it: https://www.youtube.com/watch?v=by94vOVm… https://www.youtube.com/watch?v=brDv5vzS…
Chosen Solution My Over-range LED is stuck on and thus causing complete over exposure on ALL my prints. How can this be fixed or can it? I have a 35mm Minolta x370. Nanette F. Young jnfyoung@bellsouth.net The Over-range indicator in the viewfinder is not the cause of overexposure, it merely indicates that you’re about to overexpose and corrective action should be taken. The automatic exposure control on the X-370 is aperture-priority....
Chosen Solution my phone was at 19% and then suddenly jumped to 1% and shut down, I can’t turn it on at all (even tried to hard reset and it didn’t work) so i put it on the charger and now it’s stuck at 1%. it’s been charging for three hours. Either the battery died or something went bad with charging circuit. Unless you have a multimeter to test battery voltage and connector on the iphone board you may try to replace the battery and hope for the best....
Chosen Solution Hello all, my g4 is not allowing me to get online. Also, I can’t copy or burn files, it just says not enough space (even though I have plenty). The clock resets back to the 60’s (why I don’t know), and it doesn’t save my wireless settings I have to keep entering it. I think it could be my battery, it’s only holding it’s charge for 15 min without being plugged....
Chosen Solution Basically, was recalling the PS4 console because it had the BLOD, whilst using wick and cleaning the old soldier of a trace had come of? And disappeared? Lol would the console still work without the trace being there or how do I fix the trace / apply new traces. So, the trace tore of; I put solder in the missing gap with copper wire going through it and somehow after I put my APU Chip back on the PS4 worked without no problems....
Chosen Solution My remote is not responding correctly to TV. When you press the remote to Channel or volume it automatically goes to the highest volume, and the channel just goes up continually without stopping Linda, Reprogram your remote to your TV, you can google search your remote for instruction if need be. If no luck, pick your self up a good universal remote, read packaging to be sure it is compatible with your device....
Chosen Solution Hi, My Samsung S7 Edge suddenly stop working and shut down when I was deleting some video files- because memory was full. I have tried some procedures using keys like fast reboot, safe mode, etc., but it didnot turn on. When I plug it in, the indicator is off and nothing happens. I cannot use the Dr.Fone Repair Utility because the mobile cannot neither goes to download mode or usb enable mode, nor finding by pc....
Chosen Solution Hi all, I smashed my iPhone 5 screen earlier this month and bought a new lcd digitiser online. I managed to replace this screen, connected the three ribbon cables and the screen worked well. just as I was putting the screen back into place, the entire screen went black? I have no idea what happened but the phone does still work as I can hear it receiving messages and charging....
