Chosen Solution My alternator bracket keeps breaking cause of the motor Mount so the serpentine belt keeps breaking I just replaced the alternator bracket and the belt not even a week ago I was just driving down the road and everything started to dim and shut off. So I pulled over and it died couldn’t start unless it was jumped and it only lasted maybe a half a mile. Does anyone know what is wrong?...
Chosen Solution The battery swelled and caused the screen to crack when i contact Apple they can fix the battery but will they also fix the screen too since it wasn’t damage till the battery started getting bigger? I don’t see why they wouldn’t fix it…but they will charge you for 2 repairs, the battery and the screen. You are responsible for having the battery replaced before it causes damage to the screen....
Chosen Solution I tried to take my screen off and then replacing it back but when i turned on my phone it has black and white lines is my lcd screen broken?? I had that problem once, I took the Display ribbons off and re-inserted them back on, make sure they snap back in and they are not loose. Yes make sure to clean the connectors after taking them off. Then make sure you hear connector clicking together like Legos to the motherboard....
Chosen Solution J7 max lcd is too costly can i purchase on max screen which is of same size and has same feature Hi @sunnyp, Normally No. Not unless you were absolutely sure that the individual wire functions of the cable connected to the new screen exactly matched the wire functions of the screen that you wanted to replace. If they are not identical as to wire functions it will not work It is very difficult to find out what each individual wire does....
Chosen Solution I have attached video of my laptop. Now the laptop doesnt on. I can hear the fan running smtim. The laptop does get on n work for a while then I see screen kinda flicker or lines with all sorts colors. What is the issue n how can we fix it? @kumel attach an external monitor and see if it shows the same error. Right now this appears to be a GPU failure....
Chosen Solution My printer is saying paper jam with aloud noise, why can I fix it? It will either have a latched door at the back or the bottom of the unit, to remove any stuck paper that may have jammed up the mechanism. Try looking for and opening that door and cleaning out whatever may be in there. I have a Epson ET-15000 and mine is doing the same thing and making a weird grinding noise but no paper in it anywhere....
Chosen Solution I plugged it in to the outlet, but it still won’t turn on! Do I have to get a new one, or am I doing something wrong? Make sure your speaker is plugged into a working AC socket. Check the connections between your speaker and the power adaptor. Make sure you are using the power adaptor supplied with your speaker upon purchase. If you are using a surge protector, check to see if it is working properly....
Chosen Solution I get a d5 code. Water is not draining. @dawndefreece, Dawn, If all other functions seem to work, make sure drain hose is not kinked, check plugs/wires for good connection/corrosion. Probable either washer has something clogging the pump/hose and preventing it from draining or defective drain pump. You will have to find a way to remove water/bail/wet shopvack, to do the next step. Remove hoses and pump and check for blockage, debri,etc....
Chosen Solution Howdy iFixit! An acquaintance of mine gave me her Power Mac G5 which has been failing for a while. Finally it stopped booting, though the sleep light would come on and the startup chime could be heard. I went over to take a look at it, and when I pulled it out, there was liquid everywhere! I immediately assumed that the Liquid Cooling System had leaked, and I was very right....
Chosen Solution New Mac Pro suddenly doesn’t turn on? Yesterday it was working normal and nothing happened to it. Today it doesn’t turn on anymore, still seeing the back ports light from HDMI blinking sometimes when i try to turn on. Recently updated now using El Capitain 10.11.04 Reset the SMC on Mac desktop computers Follow these steps for iMac, Mac mini, Mac Pro, and Xserve. Shut down the Mac.Unplug the power cord....
Chosen Solution Hi, i got a Nokia Lumia 635, and i just changed the screen today (was broken). I did fine, screen is working perfectly, i took the speaker of the old screen and put it into the new one like i read, but here’s the problem : i don’t have any sound coming from my phone system. Let me explain a little more : calls are ok, i can hear perfectly and i’m heard....
Chosen Solution I have had 2 customers call saying they dropped there XR and shattered the back now the phone wont come on. Has anyone else seen this problem? I am not sure if its just pure randomness or what? Any time a phone is dropped, there is always the chance that something on the logic board can be damaged. It’s probably just coincidence at this point. But first, you’ll want to open them up to see if there are any connectors that got dislodged or if there is any visible signs of impact damage....
Chosen Solution I’ve had some serious problems with my old 3GS. An external battery pack fried my powermanagent chip, causing my battery performing extremly bad. 12 hours wall-charging for a full charge. Extremly low battery capacity. Anyway, it works (worked), it does it’s thing, calling, texting bla bla. That’s history now, i got a new iPhone 4 so I turned my semi-brooken iPhone 3gs off. Two weeks later I gave my friend the 3GS....
Chosen Solution A friend asked me to replace the broken screen on her iPhone 6. As I’d done similar repairs on her daughter’s phones (and various other friends and neighbor’s iPhones) I agreed. My friend ordered a replacement screen and brought it to me along with her damage iPhone. Upon opening the iPhone case, I noticed what I presume are signs of moisture damage. (See annotated photo.) I pointed these areas out to my friend who explaned that she had no knowledge of any water damage incidents....
Chosen Solution Have and oil leak near oil pan and harmonic balancer in my 2007 unlimited sahara edition wrangler Could be the oil pan gasket. Spray it off with some engine cleaner and investigate where it leaks from. take a couple of pictures and post those on here.There is also the oil pump that is in the front cover, driven from the front of the crankshaft. Oil passes in and out of the front cover through the timing cover gaskets which may have failed....
Chosen Solution How do I fix “ Can’t reach Goggle at this moment “ or get rid of it? Hi @gbat , Check that notifications setting for the Google app is enabled. Delete Opera can help if some one is helping British People !
Chosen Solution My Blu mega 8 phone not working the button to on and off is broken how can I get it repair I have warrantee @nickisha ,LaToya , Use the link below to contact Blu products about your blu studio mega 8.0 warranty claim. Good luck. I hope this helped you out, if so let me know by pressing the helpful button. http://bluproducts.com/index.php/contact…
Chosen Solution Has anyone actually attempted to open this drive? Please only say it can’t be done because you actually tried it. Step 1: Disconnect the power cable and USB cable first ofcourse and wipe off any dust that might have accumulated on the case. It might get into the HDD later. Step 2: The Achilles heel of this case is at the front side (where the LED blinks). With the case turned on its back, stick a small, flat, narrow but strong knife or similar tool inside....
Chosen Solution I have a 2010 ezgo txt . I switched the catch plate to get a better surface. I removed pedal latch arm and ground it down( not sure if enough). The cart still will not catch on a hill. Cam is not against the latch arm but is close. Will this make a difference? Help!! James, Check to ensure there is still lots of pad left on shoes and that the shoes are still secured properly with all hardware and the same with the cables....
Chosen Solution I acquired this Mac second hand and am trying to repair it, and am faced with persistent kernel panics, but in circumstances that are not quite similar to other posts about the topic. What happens booting normally? Start up sound is normal. Fans start. Apple logo appears. Start up progress bar advances just over half. Screen flicks through black to all grey, and nothing further happens. What happens if booting from an external hard disk, or USB stick?...
