Chosen Solution Honking the car always cawing if the door’s open, why it? Hi @bakrie , Has the vehicle got a security system at all? Does the horn stop when the key is inserted into the ignition? It is does then it may have the inbuilt Honda security system, which may be set to “Automatic”. I don’t know if this alarm manual is relevant for your model Honda but hopefully it is of some help....
Chosen Solution Error message incompatible ink cartridge - I’m using the correct HP cartridge. I have the correct HP cartridge installed. It sounds like there’s dirt on the contact strip in the printer - this will do it. What you need to do is take the carts out and clean the contact strip in the printer. For good measure, clean the ink carts to be sure. Once you do that and if it persists, then it may be due to bad cartridges....
Chosen Solution My Ipod will not charge! Yesterday it was charging just fine then later that day it suddenly would not charge. It’s not the cable because I tried two different cables including one I just bought a few days ago. I also tried resetting it holding the home and power buttons but that did not work. I also tried using several different sources I tried all three of my wall chargers, I tried my laptop, my computer, my other computer, my ps3, and my ps4 but nothing I try will work!...
Chosen Solution My iPod Touch won’t restore even though my iTunes account tells me I need one, was working perfectly fine but only the apple logo comes up now. What do I do now? try this and open iTunes on your computer. Unplug iPod if it’s plugged in. Turn your iPod off (with sleep/wake and home button). Hold home button down and simultaneously plug in the iPod again. Keep holding it (home) until the screen is an apple with a USB Plug picture underneath it....
Chosen Solution I’ve had the laptop for over 5years and I’ve never had an issue with it before. I was in the middle of using my laptop when it shut down. I thought my battery just died so charged it right away and when I pressed the power button, it didn’t turn on at all like it normally does when it’s on the charger. I’ve tried letting it charge for 30mins and turning it back on but still got nothing....
Chosen Solution My little sister was with me she put a magnet on the ple that you put the hands and siche then the computer starts going slow but it was still working, i tunes wereopen and songs were working i wait and then i turn it on, but the no symbol start showing up Big companies use electro magnets to erase hard drive data. The data on the drive is magnetic coding....
Chosen Solution I have a MacBook Pro 17" 2.3GHz i7 Early 2011 BTO/CTO - MacBookPro8,3 - A1297 - 2352-1 The problem is that I cannot switch it on. I took it to the Cyprus Apple representative and replace the logic board (this is the problem according to the support center). Problem fixed but after a few months the same problem appeared again. What they told me is that there is nothing they can do, Apple aware the problem but they are not willing to do anything to resolve the problem....
Chosen Solution Hello! I got a pretty strange problem with my s7 edge for few days: I am unable to charge it using my fast charger, because it can’t be detected. I can charge it using an external battery though, which i charge with the same charger. Any ideas about my issue? P.S: my cable is a bit damaged but i think this might not be the problem as long as it does function on my external battery, right?...
Chosen Solution Hey there, Been about 15 years or maybe even more ago since this has happened. So it was about to happen any time soon, I guess; Friend of mine asked me if I could clean his newly purchased Asus E200HA netbook. He’s not a big fan of the preinstalled WIN10, so I offered him to put a stripped down custom version of Win7 Ult. 64 (UEFI) on it, instead....
Chosen Solution I don’t have a model number to go by I bought a start coil for this 5 horsepower Tecumseh motor but it wouldn’t line up with my mounting hole on the side of the motor the only thing I can think of is to measure my bolt hole fittings and see if I can find a coil that has the same measurements where the holes are so I can mount it where mine goes but there’s another problem the two little ears that stick out from the head that holds the coil on one of them has broken halfway off I rethreaded it and got a longer bolt to put in there and used thick washers behind it to build it out so the coil will tighten down evenly but it came loose and now it’s threads are stripped again is there any way I can fix this without buying a new head
Chosen Solution Hello friend, i have a big problem to solve… i have no backlight with an iPad Pro 12.9 after screen replacement.. new screen was working well just replaced but after 1 month i opened again an when i closed no BACKLIGHT.. Looking motherboard under microscope around lcd connector i maybe i found the problem.. it seems than missing a component ( signed in the pic ).. now if the problem is there i dindn’t know where to find than component....
Chosen Solution my canon camera when it is turned on won’t display any image but sometimes when I turn it off and back on it will display Hi jeff, This here is a very informative website about your issue. It might offer you a solution. Steffen
Chosen Solution Any way to repair an Airport Extreme Base Station with Gigabit Ethernet? One day the front light went out and no internet access. Used the power supply from my other Airport but it still would not power up. Thanks! I’ve seen no user replaceable parts in either the power supply or the unit. If you get no lights on the unit you can try replacing just the power adapter....
Chosen Solution so i have a iPhone 5s that had a wonky w/ digitizer so i popped it open and the connector (it was loose) this phone has been dropped a lot so the display came out almost like a 7. so like a book. every thing looks fine so i don’t know why its broken. UPDATE my mac is now detecting my phone broken screen ribbon Have you disconnected the battery and tried a soft reset after securing the screen?...
Chosen Solution Hi folks, None if the four speakers are working, no start up chime, nothing at all. Yet the OS lists them and thinks they’re operational. And headphone jack works perfectly, including auto switching to speakers as output when disconnected. Could this really be that all four speakers need replacing? Their cables look fine. Maybe audio controller on the logic board? I can’t find a schematic to check. Thanks!...
Chosen Solution Sorry it won’t work reliably ;-{ I have a 2013 Mac Pro and I foolishly thought it would work, the problem is if you encounter any cell failures you can end up with a corrupted workpiece. I work on ultra large images every so often I would encounter image gremlins! Got the correct RAM and no longer had any problems! I suspect you’ll also face that if you are working on large data sets....
Chosen Solution Hello everyone, I recently got my hands on a 2011 Macbook Pro 15. The laptop looks like it may have been dropped and the corner where the magsafe adapter goes. I am not getting a light from it when plugged in. Laptop turns on and works when I charge the battery in a different machine. Also the magsafe cord works on my other a1286 perfectly. Here are the troubleshooting steps I have done....
Chosen Solution my phone has stopped ringing and all incoming calls go directly to answering machine Hi, Check that you are not in Silent Mode. (Silent Mode On should be displayed on the screen of each handset). Here is how to enter / exit Silent Mode With the phone in standby, press and hold # on any handset. The phone prompts you to select the number of hours (1 -9 or Always On) that you want it to stay in silent mode....
Chosen Solution I just replaced my old screen, battery and charging port and everything works except the charging. I can use my headphones or charge my phone. Please help me Assuming you cannot use the headphones or charging port, I would suspect a defective replacement charge port. However, it could also simply be in improperly connected charge port so check out this guide and double check your work.
Chosen Solution Hey! Does anyone know how I can repair a stuck power button on my M1 MacBook Air? How does the click mechanism work? Would taking it out and putting it back in help? I don’t really want to work on my main machine before knowing if that’s even an option. The good thing is, that the power button still works but it’s very hard to press and sometimes it gets stuck so the machine is just looping....
