Chosen Solution I have a Samsung 61" DLP TV about 6yrs old. Numerous white dot or pixels on screen. Can it be repaired? Martin, this is usually caused by a bad DLP switch. Depending on your model, it could be the DLP board or the IC itself that can be replaced. If you give us your model number, we might be able to help you out further, but yes it can be fixed....
Chosen Solution i have zephyrus gm501gs laptop and i think that something wrong with it’s over heating , when i choose silent mode for fans cpu temp max is 87 and no noise from fans, otherwise if i choose balanced or over boost mode temps will become over 95C and fans runs noisy, is that normal temps for that model ?? Hi Mohammad, the temperature of the CPU/GPU may be nearly around 90°C, but only in the full power state (playing some game on the ultra settings)....
Chosen Solution I have a problem with my iPad 3 4G. After replacing LCD and digitizer, iPad “won’t boot” up. The device looks like dead (LCD and digitizer isn’t working, no sound when connected to the power supply), but after connecting to a computer, I can still sync files and charge the battery. I tried to reset (buttons still works), restoring to factory settings etc., but nothing works. I remember, when the screen was plugged out, I felt a smell from the motherboard....
Chosen Solution Why won’t phone charge When troubleshooting charging issues, I would do the following (in order): Always try another Lightning cable and charger, preferably Apple original or MFi certified units.The Lightning cable 8-pin connector should be sitting flush with the housing and completely inserted. If it is not, there could be lint/dust/debris inside the port impeding a proper connection. You can clean it out with fine point tweezers or a dental pick....
Chosen Solution Hello, I am working at Allicdata, but today I suddenly found out that the computer screen is broken. What should I do? When the computer is turned on, the computer screen is a white frame. After a moment, the frame is gone, and there are many vertical lines and splash screens. What should I do, thank you! @annaa the only way to fix this is by replacing the screen....
Chosen Solution I accidentally plugged in the turntable into 220V, only to realize that the adapter is 110V. I made the mistake of trying to turn it on multiple time whilst it was plugged into the socket, as it wasn’t turning on. Any advice as of what to do? Base: Bottom: Top: Whole: Adapter: Hi, You will have to open it up and inspect the damage. If unsure of what to look for, check for obvious signs such as burnt out components (even cracked or blown open) especially on the power board (where the power input connects to....
Chosen Solution Hello everyone, I had a question and was unsure wether or not to open a new thread or append to a similar thread. Had repaired my iPhones like dozens of times in the past. My current iPhone6 Model A1586 had vertical stripes resembling white noise this morning; restarting didn’t help. I presumed a cable was loose, so I opened it up, unplugged and reattached all cables leading to the display....
Chosen Solution Hi guys, I currently have iMac 2011 with SSD ( used OCW thermal kit ) but I know that I can add one more SSD - my question is: can I use power splitter cable ? ( basically power cable for first SSD will power up both SSD ) Or I need to get “special” (https://www.amazon.co.uk/OWC-Internal-SS… ) power cable from board ? I know that SSD need little more power than HDD....
Chosen Solution The Cinema HD Display 150w Power Adapter produces an “on” light on the 30" inch, but the display itself doesn’t turn on. Monitor itself is fine with working adapter. Can this be repaired? I can google that it needs a Dremel to be cut open : “Use a Dremel to carefully cut around the seam until it was thin enough to crack apart. — There’s one huge capacitor (Rubycon KXW 450V 150 uF) that needs to be discharged before the power supply will start up....
Chosen Solution for an art installation i need to equipte the laptop with an external power button. i have done this before with older macbook pros and mac minis. but does anyone know where the power on pads are for this model? A1398 thanks On many models they stopped with pads and from the ribbon cable connector you have to ‘‘‘short short pin 5 to pin 29 or ground’’’. If this Answer is helpful please remember to return and mark it Accepted....
Chosen Solution PowerMac G5 DUal 2.0 Ghz PCI-X Serial No. : CK411J3JQVJ This PowerMac works perfectly… until it powers itself off. I expect it needs a new PSU? but which one ? Disable Energy Saver computer sleep & put hard drive to sleep settings. Remember to return and mark accepted the answer that best solves your problem. Good luck, N
Chosen Solution My charger has stopped charging, trying to plug it into the macbook will not give anyone any light and will not charge, is there any way to know if it could be problem with the magsafe power supply or cable? See this answer: Laptop not turning on or charging. No light.
Chosen Solution My camera fell from 1.5 meters height on the floor. Now the lens would not retract completely and keep making loud clicking noises in the process. What can I do to fix it? dvl12, you can try this at your own discretion, you say the lens will not retract completely. Try giving the lens a helping hand/ give it a moderate push with the palm of hand when it is retracting....
Chosen Solution My macbook is approx 2.5 years old now and I have had no issues what so ever with it, except one day, I plugged my 2nd display into my DVI out and even though the screens were shared correctly, my 2nd display was pretty much totally coloured in red! i have tried plugging into LCD TVs over DVI-HDMI but the same happens. Perhaps a pin is damaged in the DVI connection port causing blue or green to stop coming through?...
Chosen Solution So my back camera started stuttering a while back and I found that magnets can get it to work, so I bought some small 3mm neodymium magnets and put them inside the phone next to the camera and now both the front and back camera are not working. any ideas? You put it on the device internals? Where exactly? Neodymium is still an electrical conductor And putting any sort of electrically conductive material near a circuit board has the potential to do damage....
Chosen Solution As an addition to the title, the power light and internet light are flickering faintly, no battery light however. Just before this it boots just fine but I did a combination of power button and F12 (I mistook for BIOS key) and it suddenly shut down with the current state. I did try hard reset but nothing happens. So did I destroyed my laptop? Btw on the back it says “X452LAV"....
Chosen Solution My m2 smart watch only comes on when I’m charging it. But it goes off when I remove it from the cable. I’ve charged it for over 5 hours and it’s still not coming on. Please what can I do? Hi @whales75 , It seems as though the watch’s battery is failing to hold its’ charge and may need to be replaced. How old is the watch? In most locations there is a 12 months manufacturer’s warranty on the watch....
Chosen Solution For a little while my screen has started flickering in bands of white/black/grey for a few seconds, after which it rights itself? Is it a sign the display is near its end? What shall I do? Thank you for your help. Hi, As a DIY repair all you can do is to open the tablet and check if the LCD display flex cable connection is secure to the systemboard and if so, then to temporarily replace the display module and check if it now works OK....
Chosen Solution Hey Guys i have an iphone 4 32gb and the problem is the screen it turns black then gray then white and there are weird red dots in it to someone sat on it that is when i noticed i tried hard reset but nothing all the controls like voice control and the music plays but i cant see anything please help! (oh yeah it is factory locked)...
Chosen Solution Looking to install the above hard drive in my old MacBook Pro. I need some guidance in copying my old drive to the new one and installing OSX. Probably formatting guidance as well. I’m confident in the physical install. The computer is currently functioning and I have the new drive plugged in as an external. The old one is currently running El Capitan Version 10.11.6 and is too old to go any higher....
