Chosen Solution I’m installing my new hard drive and I lost the paper I received with my package that gives directions on how to start up and install new software can u please email me a copy of the directions? Riamodel@gmail.com Start up from your system installation disk by inserting the disk and restarting holding down the “C” key. Go to the second page pull down menu -> Utilities -> Disk Utility....
Chosen Solution I installed a new 500gb HDD in my 2012 Mac mini. I was able to start the internet install and got to the screen that asks to chose a drive to install the operating system. There are no drives listed. I tried searching for answers and one kept coming up saying to go to utilities and erase and have the drive journaled so it could be written to. I tried this and my HDD is listed as being 2....
Chosen Solution New mac mini has announced without ODD today. (20th Jul.) Does this model can have two HDD, like server versions? I think it is impossible because if it is possible, there’s no advantage to buy server model. If I can add HDD to normal(non-server) version of new mac mini, is there any difference with server model? (for example, hardware raid controller? does server model has it?) Please, show me inside of new mac mini, I love ifixit!...
Chosen Solution Customer claims that pre-iOS 12 the device still wouldn’t record audio, and updated in hopes of fixing it. Still no dice, any ideas? The phone records video just fine, but there is a complete lack of audio. (I tried using third party apps, the external mic on headphones, the whole sha-bang.) As for voice memos, the record option is quite simply grayed out and unavailable. Is it a chip issue on the board, or?...
Chosen Solution Hi all, My macbook 2009 suddenly will not turn on one day. No response at all when pressing power button.Plugged in MagSafe power adapter in doesn’t show any light on LED (green or amber) I went to Apple Store they suggested it’s the issue with MagSafe/DC-In board since they tried with a new power adapter and still there is no light on the MagSafe LED. So I bought a new MagSafe/DC-In board, changed it out, but still dead....
Chosen Solution I have a Samsung Galaxy J2 Pure. I recently dropped on phone on soup while it was on, screen side facing up. Naturally, I frantically started to wipe it clean. I got the screen cleaned up and proceeded to address the backside of it. The problem lies where it does sound when I get notifications or it rings. However, it does not have sound when I try to play Youtube or Facebook videos....
Chosen Solution all i need is that my macbook air is stuck on mute and when i go into settings then sound, the mute box in stuck grey and i can’t do anything about it and i can’t unmute it. When i click the sound up or down buttons, all it does in show the icon with an ø a the bottom, showing that i can not turn up or down the volume....
Chosen Solution My UE WonderBoom pairing button not working! It always turn off the device!! How I can fix this? I’m suspecting you’re hitting the wrong button. Review this image: The small blister on the top is the pairing button. It will light up when its’ trying to pair. You may also need to charger your speaker if its going off by its self.
Chosen Solution Because of a recent accidental drop, the palmrest assembly on my XPS 13 (9343) is broken on the part where the hinge is fixed (see the circled part in image) . I live in France and the cheapest way to buy a spare palmrest assembly would be to buy a second-hand one. I was wondering if palmrests from other series of Dell XPS 13 would be comptabile with mine, as the touchpad might be smaller on mine than on newer versions for instance....
Chosen Solution Hey, I know this probably isn’t the place but its worth a shot. My note 4 keeps getting hot and turning off… I know it’s common. I could hear something rattling so I took the phone apart and discovered a small metal pad that had come off. (links below) Metal Pad - https://i.imgur.com/YIMpkos.jpg Missing Area circled - https://i.imgur.com/znwWzBu.jpgI I have managed to locate where it is from as you can see in the image above....
Chosen Solution i bought an iphone 8 normal with icloud, the previous user forgot the icloud password now i can log his icloud out. i. need help on that Go get your money back, it’s probably stolen. @nammowgli the only way to remove iCloud is by the original owner. There is no work around to remove the iCloud lock. I would try to return the phone and get my money back....
Chosen Solution I have a Micromax YU Yunicorn, it doesn’t charge after 85%. Initially it didn’t charge after 98% then 88% then 85% . Please help. Discharge your phone completely — run it down until it shuts off. Then charge it up as far as it will go, and discharge it one more time. Hopefully this will calibrate the battery to register its capacity properly. If it doesn’t, then you’ll need to replace the battery....
Chosen Solution Iphone 6s came in with water damage, it had a vcc main short that I was able to find and relieve. I then ultrasonic cleaned the board for a good amount of time. And now it shows the apple logo then static (refer to attached photo) I’ve never really seen a phone do that and I’ve been trying to figure it out for quite some time. Anyone have any suggestions on what to check?...
Chosen Solution Phone was shut off Durning a factory reset when it was turned back on it went to Android is starting starting apps in a white box with a blue circle going non-stop for days. So did another factory reset this time it went all the way through it little Android dude came on it restarted went to same screen with white box and there it sits with that blue circle spinning....
Chosen Solution So last night I was using my phone and then the next minute it turned off and now it’s completely dead. The phones in prestige condition no water damage screens perfect. I have no idea what happened. I have tried hard resetting plugging it in used different cords, tried my computer too. Completely unresponsive. This was a phone apple sent me about 6 months ago they said warranty is only 90 days....
Chosen Solution The power button didn’t work for 2 weeks, then it worked for a day, now doesn’t work again. It will turn on if I plug it into a power source. But not with the button alone Hi, If it works with the charger connected but not on the battery alone, your battery might be failing. Have you tried to just charge the battery (don’t turn on the Tab) for a few hours and then see if it works on the battery alone?...
Chosen Solution This is the second machine I’ve seen in a week with the same problem, or at least very similar. The one on my bench presently is an Elitebook 850 G8, the one I replaced a system board on was an Elitebook 845 G7. As soon as any type of power is connected, either battery or AC adapter, the charger LED will turn on white, but blink amber simultaneously. I believe it blinks 10 times....
Chosen Solution Good afternoon, after re-replacing The screen of a client, I’m facing some problems with the touch screen technology… After I’ve taken off the screen glass, only part of the touch sensing was working (bottom-left part of the phone), I’ve tried taking off the LCD and cleaning up the internals with a towel, but after I’ve reassembled the LCD, the touch was completely gone. I think (and wish) that it is only a cable positioning problem, but I can’t fix it… Need help....
Chosen Solution My ps4 is infected with cockroaches like I said in the title but what I need to know is if there’s a repair shop that will fix cockroach damage and if there is please tell my the the name of the store. It would be convenient if it was in LA will check daily. Here’s how to tear it down: PlayStation 4 CUH-1200 Entire Console Disassembly Here’s some info about your roach hotel: http://kotaku....
Chosen Solution So I recently installed Magic Lantern to my Canon 60D. All is well until I encounter a few problems: My charged camera’s battery won’t turn on when I need to use it. Putting the battery on the charging cradle shows that the battery is flat and in need of recharging My camera cannot turn on after I remove and reinsert the memory card. Removing and Reinstalling the battery fix this problem It all happened since I installed the Magic Lantern, so naturally I blame Magic Lantern and uninstall it from my camera....
