Chosen Solution Hello, I hope someone can help me, I am pretty desperate! I’ve had my beloved Roomba 620 for two and half years. It was bought in Italy and it came to me all the way to the U.S. nine months ago. It’s been working perfectly until two days ago, when my cat peed on it. I looked online and followed the instructions as to what to do in case the Roomba gets wet - I removed the battery so that I could let it dry....
Chosen Solution My steering column has become loose. How do I fix? If the whole column is moving follow the column from the steering wheel down to the firewall. You should find one or two brackets designed to hold the column in place. The bolts on the brackets may have worked loose. If the movement is inside the column shell I would strongly urge you to seek professional help immediately as this not an area for a beginner....
Chosen Solution I have diagnostic LED 1 and LED 2 coming on but no LED 3. I have replaced the logic board. All capacitors look great. When i press power, the computer comes on, light comes on, no video and NO CHIME at all. After 30 seconds, the fans come on. If the board is okay, what else is wrong? Why aren’t the LCD and the Logic Board communicating? What connections do i check?...
Chosen Solution I got an iPhone X to repair which had a damage screen and did not turn on when connected to power so I opted for changing out both the screen and the lightning flex connector. Replacing both results in the same thing happening, I hooked it up to a USB voltmeter and the output goes every couple seconds from 0A to 0.08A. Using a wireless charger also doesn’t do anything although it says on the charger that it is giving charge....
Chosen Solution Hello - I have an IPhone 6 S plus, the wifi is greyed out but the Bluetooth turns on and can pick up BL devices. In Settings / General /About a wifi address can be seen. Have replaced wifi modules and antennas - the symptoms don’t match the classic wifi IC failure and the phone is not getting hot. Any ideas? Thanks I thought someone had answered this. Why is my WI-FI greyed out?...
Chosen Solution Phone charges but the home button and microphone do not work. I just installed a new battery. After reassembly, the home button and microphone are not working. Any assistance would be greatly appreciated. Thank you! Is the phone charging? Headphones jack is working? Answer this first. Second, did you disconnect the lightning connector during the battery replacement? Did you nick something on the board, and/or did you pry at any time between the battery and the logic board, especially next to the charging port connector?...
Chosen Solution Hey, so I did a screen repair on an iPhone recently. It went fine, and before I reconnected the clips holding in the screen I tested it to make sure it was fully functional, which it was. I got busy and left it open for about a month, then I came back to it, made sure it got a good clean, and closed it. Booting it up I noticed a small orange spot on the top right corner, and whenever the screen was displaying a dark colour the edges in that corner would be very light....
Chosen Solution I have an ibook with Panther 10.3. I have one issue with itunes. I am using the version of itunes that came with Panther 10.3. Would I be able to upgrade to a higher version? If so, how high can I go? This version doesn’t seem to be able to read the backup discs that I made a while ago on the other computer. It also doesn’t give a “recently added” playlist on the ipod, which is really nice....
Chosen Solution I have a mpc clientpro 545 and i had windows xp on it i turn it on and my fan and cpu fan run constantly and i dont get any boot logos i have a black screen what can i do to fix this please help Update ok today i went on the cpomputer ddid the thing with the battery and it didnt work i took the battery out and the jumper off after i tried just the battery and turned ir n and it worked but got nothing on my screen the cpu fan turned off and the cylinder symbol next to thepower button was lit up orange when it turned on i got one beep then when i pressed the power button it immediately shut off when i turned it back on i got no beep and the cylinder did not glow orange and when i press the power button it did not shut off i have to hold it for five seconds to shut it off when i turn it on i have the fan and cpu fan running constantly and nothing on the screen i do not know what happened to it it was working fine and now i have this problem with it ok i will wait for a response ill check back tomorrow for an answer that might help me with this probem ok thanks for helping i am looking forward to providing you with all the information that you need to help me ok bye Update Ohh and i have windows xp on it not had i turn it on and there are no beeps just the cpu and regular fan constantly run when i press the power button it does not shut off but i will try these steps that you have provided me so i can see if i can fix this...
Chosen Solution Ok so I got a 28 dollar screen off of amazon and when I got it I replaced it. I followed all guides and tutorials carefully and kept all my screws organized but now the phone takes about 5 minutes to boot up and the front camera all speakers on the phone and microphones aren’t working as well as the home button not clicking but still reading Touch ID I’ve already opened it up and re connected everything and still the same results....
Chosen Solution I dropped my phone in water 2 months ago and i got it repaired I replaced the battery and now it is overheating and dying quickly I don’t know what is wrong with it because the guy that fixed it said I should have no more problems, anyone know why it could possibly be doing this? Also the Touch ID has stopped working. Could be a short on the board....
Chosen Solution I replaced the screen recently. The phone was dropped on a concrete floor while in a case but received to visible damage. Soon after this the power button stopped working. If the power button is held down the phone will not power off. However, the phone will perform a simple restart by hold the power button and home button. In addition, the charging port must be loose as when a cable is insterted is cycles from charging to not charging unless the cord is in just the correct position....
Chosen Solution Hello I have an 42 inch LG Plasma TV (42px4dv) which I have had for several years. Recently I have been having issues with the TV. When I turn on the TV, the TV turns on though all the pixels are black. Slowly, pixel by pixel they turn from black to displaying the picture. After around 20-30 minutes, all the pixels display the picture and the TV works fine....
Chosen Solution Video: Yesterday my TV decided to stop working and I’m having trouble diagnosing the issue. Here’s a video of the issue: https://youtu.be/F8IWaukZyHg Description: The TV will work properly for around 30-60 seconds. Then the sound will briefly slow down before the TV “crashes”. It stops responding to the remote (normally a light below the TV flashes when a remote command is received) and a whining noise can be heard at the rear....
Chosen Solution Hello, since few days I have a problem with my fairly expensive and relatively new (late 2019) MacBook Pro. All that happens flickering, lines when moving the display is like the flex cable problem. Changed display angle and changed screen. On a 2nd display no problems. But The repair program is not for late 2019 devices and also not from 16 inch. Can anyone here please give tips or help....
Chosen Solution Replace the main board. @jafinch78 this “did notice what looked like discoloration “ could be an issue with your LED power board. You want to go ahead and post some good pictures of all of your boards with your question. Use this guide Adding images to an existing question for that. It will allow us to see what you see. You will have to have a multimeter to see if your power board as the voltages that are required to run your TV....
Chosen Solution my daughter got my phone wet only a little not a lot I have the batterie an phone sitting in a bag og rice will that work sarah miller no it will not. Rice does not do anything and it is a total waste of time. You will have to disassemble your phone. Use this teardown to help you with that. After that you need to remove all the EMI shields from your mainboard....
Chosen Solution My 2017 27” iMac randomly powers down. One month after purchase it didn’t boot at all so apple replaced power supply after which it intermittently powers down without any sound or notice and at any time. Sometimes while booting up. A few days back apple changed the logicboard but that also didn’t solve the problem. I made a video of this issue https://youtu.be/uCr92WGQa0M Any suggestions what could be wrong?...
Chosen Solution Hi. First: sorry for my bad English. I have problem with my laptop. After I tear down my laptop because USB port won’t load any USB’s in it nothing was popping up so I decided to tear it down to see what’s the problem. After I tear it down I did not see any problem with USB ports so I put it back like what it was before I tear it down....
Chosen Solution My Frigidaire microwave oven is not heating. The countdown timer runs as if it was heating, but that’s about it. Any suggestions? The kind of failure described in this section could be due to failure of the magnetron tube, the power relay that supplies the magnetron tube, or the high voltage supply for the magnetron, especially if the turntable, fan, light and controls all still appear to be working....
