Posts

Chosen Solution Does anyone have a good source (an Apple service manual would be ideal) of instructions for taking apart a 23" Apple HD Cinema Display (Aluminum)? I’ve poked around online but haven’t found anything great. Thanks! Try this link. Ralph http://docs.google.com/viewer?a=v&q=cach… Once inside, check the VR3 3.3VDC REGULATOR center pin to make sure it is putting out 3.3v, bad one will put out about 4vdc. It is very common problem with this 23" aluminum case....

Chosen Solution I have a iMac Intel 21.5" EMC 2889 that will not power. When it is plugged in there is no sound or anything that would let you know its starting. what I have done so far is as follows. I checked the power button and it makes contact. I also checked the resistance of the input plug to the internal connection with a ohm meter. I have continuity on both wires....

Chosen Solution Lost remote to tv, can’t turn tv on by side buttons because I think the child lock is on Have you tried holding down the power button on the side pannel for around 5 - 10 seconds? Sometimes this bypasses the lock and allows the TV to turn on

Chosen Solution I work in a repair shop. I just did a screen replacement on the s7 edge. After getting everything back together and turned on, there is a circle with a line through it where the signal bars are supposed to be. I did damage the coax cable and gave tried numerous other cables. I have taken it all apart multiple times and triple checked my work but to no prevail....

Chosen Solution USB not working at all. mac fires up but not a peep out of the USB tried plugging different USB devices in which have lights on them but doesn’t seem to be power available According to what system you are running different IOUSBFamily are needed. You can look it up here for a detailed decription of the problem and which files are needed:http://developer.apple.com/hardwaredrive… or just reinstall your system and the updates....

Chosen Solution My sony dvd dz350 is not reading dvd discs but others is reading if you had tried different dvd disk , e.g. dvd-r , dvd+r, etc and misc, but it will not play, most probably the dvd laser section in your player has some issues. There is pretty limited info about this home theater system DAV-DZ350. There is no mention of playing Blu-Ray discs. Could you be trying to play a Blu-Ray?...

Chosen Solution After replacing my iPhone 6s screen, everything seemed to be working fine. But occasionally the screen will become completely unresponsive. Typically the home, volume, and power buttons don’t work either. On occasion, they do. Performing a hard reboot temporarily fixes it. I imagine this is due to there being something up with the connectors. Maybe a pin or some dirt/glass from my old screen. Has anybody else experienced this or have a solution?...

Chosen Solution My daughters iPhone 7 died this week. She said it suddenly started re-booting, got hot at one point then started and worked, only to die and refuse to restart. I took it to ubreakifix. They plugged it in and saw that it was charging, but not starting. They immediately went to “screen replacement”. Strange, but OK. They called me to say they couldn’t get it running and even tried a different battery....

Chosen Solution SPOILER: THE PHONE DIED YEARS AGO I’M JUST CURIOUS ON WHAT THE ISSUE COULD BE. My Iphone 4 began giving me these ramdom shutdown issues. The phone would turn off by itself if left unplugged for more than five minutes. It dind’t matter if it was used or in iddle or the batery porcentage. You could turn it on as soon as it finished shutting down and it will appear in the same porcentage as when it shut down....

Chosen Solution i dropped my phone and the sound doesn’t work at all. Now the phone will not charge at all. Its not even registering the charger being attached Sometimes after a drop, or after repeated drops, the logic board can be damaged, specifically the solder connections underneath some of the IC’s. This can affect pretty much any IC and it can cause some unpredictable symptoms. However, before getting into potential micro-soldering repairs, you need to eliminate the possibility that there is a problem at the modular level....

Chosen Solution Hi, I believe this question has been asked before but I don’t think a concrete fix was ever established due to the difficulty in isolating the problem in everyone’s machines. To describe the problem - when I press the power button, it will begin the boot up sequence with chime to grey screen, then apple logo, then the power will cut out. This will occur with several attempts (3-5 or more attempts), until suddenly it will fully boot and operate....

Chosen Solution Hi I recently purchased two samsung evo 840 and a optibay caddy, removed my dvd drive from my mac put in the two ssd but couldn’t format the one in the optibay caddy, had no issues with the one in HD position, was going to set up raid 0, checked the link speed both state 6 gigabit. have swapped drives out and the caddy one will format in the HD position, any help pleases, kindest regards Neil...

Chosen Solution Hi there iFixers, I have this problem with my MacBook where my display is showing some weird stuf to the point where the actual content is almost invisible. Here is a video of what I mean. I tried hooking it up to an external monitor and it works perfectly fine on the other screen. I already tried resetting te NVRAM and all that kind of stuff but with no success....

Chosen Solution Most likely, something is clogged, but before I open it up I’m asking for input. So the fan will buzz noisily at high speeds and if I put my ear up to it at normal speed I can hear the buzz. might not be dust because to my knowledge, dusty fans don’t buzz. this started a week or two ago. Haven’t opened it (yet) either way, If I open it I’m making a guide....

Chosen Solution I replaced the starter switch two years ago when I bought it, problem now is you plug it in and it doesn’t make any noise, I unplugged it 24 hours hoping to restart it and plugged it in with no response. Is there a fuse? Normally, most all appliances have a fuse. It is a matter of getting out your NCV or meter and tracing the power into the unit....

Chosen Solution My furby just quit moving and his eyes want to stay shut .so i put a piece of paper in 1 eye lid to keep them open. Verbally he is ok .just NO MOVEMENT AT ALL..what can i do to fix?.is there an fix it shop for furny? So i can get him fixed ? The small 6V brushless DC motor went wrong. I had the same issue. You can replace it with one from a PC DVD reader (this is the door opener motor)....

Chosen Solution Stuck oN Apple logo , I follow intruction press button switch and folume bellow , still not work out. Any AD I e tO fix My problem . Thank you so much . Rni iPhone 7+ A faulty battery can produce these symptoms. Replace your battery and it should boot up properly.

Chosen Solution Hy everyone! I have a problem with an old Ipod Classic A1136 (5th generation). The iPod is completly dead but there is one sign of life. If I charge this iPod the chip with this number (6A 4066 N2647) is warm that’s the only sign of life. The chip is on the front of the motherboard and on the top of the left side. If I charge the iPod with or without the battery the chip is warm as well....

Chosen Solution Hello everybody. My MacBook Pro 13" 2.53 GHz (Mid 2009) stopped after a short in the circuit at charging section. The isolation around the pins at the DC in board was gone. When connecting the MagSafe plug to the Mac the short circuit took place. I replaced the DC in board with a new one and also a burned MOSFET on the logic board. After that the Mac starts up and works fine....

Chosen Solution My magsafe port failed, then I replaced it and now my battery isn’t detected and my MacBook won’t charge At this point it sounds like your battery is bad and/or the charging logic on the main logic board is damaged. Often fake MagSafe chargers or ones that have a worn cable can damage your system OEM MagSafe Chargers vs Cheap Imposters: Teardown for Truth