Chosen Solution The same situation. The battery is not charging. Can you tell me what’s wrong with her? Power cord is normal, possibly i / o board? Is your battery is new or still good? maybe try PRAM or NVRAM. Sadly the logic board charging logic is damaged, This will require someone with deeper skills to diagnose what has failed or you could just replace the logic board.
Chosen Solution I had loaded an oxford advanced learners dictionary 8 edition,it was working perfectly well but now it refuses to open it aborts.I tried to remove from the preferences last entry i could not locate one to delete,i erased it from the hard disc reloaded even then the same message kindly guide me please.thank yoiu I’ve never seen an update bother an application. The dictionary is a universal app so even going to OSX 10....
Chosen Solution turn phone on but keeps saying screen locked I’m not 100% sure what you mean when you say the screen is locked. To me it sounds like it is asking for the passcode. You may want to try doing a hard reset of the phone (don’t worry, your data should be safe). Hold the power button at the top and the home button until the phone shuts off and keep holding until the Apple logo comes back on....
Chosen Solution I recently replaced my Iphone screen. when I tried to turn it on, it wouldnt work until i plugged it into the lightning port, where it then showed the apple logo perfectly fine but after 1-2 seconds later, it would go to a black screen. The thing was still on, as the backlight was still on, but there was no display, even though the display worked fine from the apple logo....
Chosen Solution my Compaq model PX356UA has a pink color on the monitor. I can play a game but can’t see much to do anything else. Best Buy said HP wasn’t selling what I need to fix it. Any ideas?it is xp Thanks Jeano jean, pink discoloration is usually caused by a bad LCD. Check to make sure that all your cables are properly connected. Check the LVDS connector as well as your inverter....
Chosen Solution My daughter has a blacklisted I phone 11 pro.. she went swimming yesterday and took it under water and took videos and stuff. She also said she dropped it when she was getting out of the car. She said that it said battery low when she got home and put it on the charger nothing happened screen stayed black can’t get it to turn on or charge. Hard reboot does not work....
Chosen Solution My car dashboard keep showing “FR Tire.” What does it mean? Sometimes its there on the dashboard, sometimes its gone. Thank you in advance. -JJ Hi, Here is a link which describes the tyre pressure monitoring system in your vehicle. Given the indication it is pointing out that there may be something wrong with the front right tyre pressure. As you say that it is intermittent, after you have verified that the pressure is OK maybe you need to get the system checked for correct operation....
Chosen Solution Hello, Today I tried to repair my iPhone 7 screen, but unfortunately I ripped my home button cable by accident but the screen I ordered didn’t come with a Touch ID connection. But my home button didn’t want “click” after turning on the Phone. I just wanted the home button to click not the Touch ID. Do I need to order another home button? regards, Oh no. I’m sorry....
Chosen Solution My Kenmore Elite french door refrigerator will not stop dispensing ice or water long after I release the lever. I have tried to clean it with appliance cleaner but am still having the same issue. I cannot get it to stop unless I time it or open the door. My warranty is expired and don’t want to pay the high cost of appliance repair. What can I do to resolve this issue?...
Chosen Solution My iPhone 5 won’t turn on. When I plugged in to the charger the apple logo come and disappeare within 5 seconds. What should I do? Have you had any recent repairs or trauma to the iPhone? (dropping, water damage, etc) If so, please describe, if not, read below. Firstly, try using a different cord, perhaps the one you are using is damaged in some way. If not, do a soft-reset....
Chosen Solution Washer filled then stopped and now won’t start Cause 1 Lid Switch Assembly The lid switch assembly prevents the washer from spinning when the lid is open. If the lid switch assembly fails, the washer may stop mid-cycle. To determine if the lid switch assembly is defective, use a multimeter to test each of the lid switches for continuity. If a lid switch does not have continuity, replace it....
Chosen Solution My laptop suddenly died for some odd reason while I am charging it. I tried to hook it up on the charger and the green light at the side lighted up but the opacity of the colour green was like 50% and not hundred like before. I tried turning it on but didn’t hear the chime nor the screen lighted up. What do you think is the cause of it?...
Chosen Solution i recently chnaged my sim card from the company telia to telenor but now that i transferd to the new sim card my honor 8 wont recognise it. when i go to the sim tool kit it says “insert a SIM card” and i can currently only use emergency callls Hi, I don’t know where you are (I assume it is Sweden maybe?) but here is a link that shows the frequency bands supported by your phone (it is a Huawei Honor 8 isn’t it?...
Chosen Solution I bought iPhone 6s yesterday rose gold colour and one of the screws of my iPhone is coming out automatically don’t know why. Well whenever I pick up my iPhone vertically the left hand side screw comes out only it doesn’t fall down only comes out while the right is perfectly fixed .any solution please help? @hyder247, Hyderali, It is possible the threads are stripped on screw or where the screw threads into....
Chosen Solution The wand for my Shark Rotator Professional won’t release. Is there something I can do to get it out? First, unwind the cord from the machine and try to pull the wand again. It is poorly designed, in that if you have the cord wound on the machine, it ties the 2 parts of the vacuum together. If this doesn’t work, look at the space between the chrome pipe and the white plastic where the 2 pieces come together....
Chosen Solution Hi, i need your help, crazy story. While i was DIY the battery replacement on my Macbook Air, i put down the factory battery on the table. My youngest (autistic) son picked up the factory battery & the iFixIt replacement battery and went to his room before i had time to stop him. Long story short, now i have 2 batteries, that i have no clue which one is the factory battery & the iFixIt replacement battery ....
Chosen Solution I just bought this iPhone 6 Plus sprint from someone and I want to put it on family mobile which is a branch of t-mobile. I looked it up and found out that the phone can be switched to a GSM network. I just don’t understand why when I put the SIM card in, the phone say invalid sim. I had sprint unlock the phone but it still saying the same message....
Chosen Solution I went away for Christmas and before I left I turned off modem and router and turned off the network printer. When I returned I powered on everything as usual. I tried to print something and network printer shows as offline from my laptop. I replaced the network cable, but still shows as offline. The green light is on when I plug the network cable in and the orange or amber light shines if I gently wiggle the cable....
Chosen Solution Some claim to be “OEM” original equipment manufacturer in this case that would be Foxconn, I’ve contacted two Premium Service eBay sellers with very high reputation, one claims to be (100% OEM made by Foxconn) the other says that only Apple could get their supplies from Foxcoon. If it is possible to get hold of the genuine article or is this another marketing term if not is there a way to tell a fake from OEM?...
Chosen Solution Hello. Few days ago, the sim tray of mi old iPhone stuck inside, so I had to disassemble it. I had a lot of problems to do it, and, in the proccess I cut one of the antenna cables, the one that is connected in the middle of the antenna ribbon sheet. Edited: Read the actual situation below the first image. The cable is cutted very closed to the metal cable support in the side of the phone (see the arrow in the photo), and I’m afraid that if the cable make contact with the support, the comunications board (or something else) could be damaged....
