Chosen Solution My flip video model F130W, goes off immediately when switched on. I put it for change overnight and even than it goes off within 5 seconds. any one can help to fix it ? The rechargable batteries in Flip cameras are low-quality and lose their charging ability quickly. I have a similar problem with my Flip UltraHD. Most flip cameras can use AA batteries instead of the rechargable battery....
Chosen Solution My hitachi 500 GB hard drive is dead. It does not respond when power is given. I have all my childhood memories in there. can it be repaired? There was some smoke came out of it when i tried to check it. and also it got a kind of a hole in its one chip, please help my email id is pardeep0598@gmail.com ……….please help Sadly there is little you can do here....
Chosen Solution Hi, first of all thanks for any help that you can provide me. My computer can’t boot the system, at the first time start to can’t find the system and show me a folder with a question mark, so I try to reinstall the system (Lion) and can’t boot from the CD or USB, just show up the apple symbol but never more than this. So I proceed to change the HDD for a new one and make a special partition with a bootable “OSX Lion Install” saved inside, and have the same problem....
Chosen Solution My phone wont turn on at all even if i put it into the charge still nothing happens q: what happened to it before it shut off? Q:was it dropped? is the casing cracked in such a way as to the battery not making contact internally? do you have another phone like it that you can swap the battery and or charger on? if not, do you have a way to see if the battery is getting charged or is charged at all?...
Chosen Solution Yesterday morning the ps4 stopped coming on its only 3 months old. Its model Cuh1215a i wanna try and fix it myself but cant seem to find the power supply for the model any ideas? Hi! If there are no noises and no lights then you try to turn it on it very well could be the power supply. Sometimes they are available on Ebay. My company also sells them....
Chosen Solution So when I use the phone, always theres an irresponsive touchscreen thinggy, when I’m typing doesnt respond or it clicks somewhere else or when I multitask it just freezes until i lock it and unlock it. I don’t know why it acts like that but to momentarily fix it i need to lock and unlock the phone. The phone is half a year old Edit: also I sent the phone to Oneplus to get warranty repair and nothing, the phone has been rebooted and restored for like 3-4 times....
Chosen Solution I was able to bootin safe mode once and o restarted several times to see if it worked better but when I shut it down and turn back on the progress bar goes to the end and just stays there it doesn’t boot. I’m new to Mac OS I was wondering if someone could help me? A common issue with the 13" models is the HD SATA cable breaks down so it interferes with the movement of the data, you’ll need to replace it....
Chosen Solution I have a new Ematic Genesis Prime XL. I charged it overnight, but it won’t turn on. What can I do? leking , Try holding the power button on for a while to see if powers on. If you are experiencing trouble with a new tablet already, probably best to return it for repair/replacement/refund. You can also contact Ematic at the link below for more info. Good luck. I hope this helped you out, if so let me know by pressing the helpful button....
Chosen Solution I’ve been working on an iPad 2 that was dropped. It worked fine, despite the digitizer glass being shattered. I carefully disassembled the unit and installed a new Digitizer. Before sealing the digitizer in place, I tested the iPad. I discovered that the LCD backlight was not working. I reseated all cables. No change. I inspected the unit for any visible damage and found none. I replaced the LCD with a known working unit—and there’s still no backlight on the iPad....
Chosen Solution I am facing with this problem: Phone came with this problem: Not charge & battery drain. Replaced after confirm: Tristar. Result: Charging normally, no battery drain. Problem: No battery information / Random reboots. After replace TIGRIS: No result. In good one board 7/7+ BATT_SWI line is 1.6v, same as my fault board. Measuring diode mode SWI_AP_BI_TIGRIS = normal Measuring diode mode TIGRIS_TO_BATTERY_SWI = normal See image content:
Chosen Solution no heat, everything ‘works’, heater hoses get HOT - both in and out. Sounds like the “blend doors”, or the “blend door actuator”. These internal vent doors move to adjust the cabin temperature, for the driver and passenger. You can fix it yourself and save a lot of money. They are usually located behind the glove box, but you will have to cut away some plastic at specific locations to access the area....
Chosen Solution oki c612 error 173 printer @ahmed511 172: Error and 173: Error =An abnormal (172: high or 173: low) temperature of the fuser thermistor was detected Possible repairs to fix this: Restore the power. Replace the fuser unit. When the power is restored, the display may change to Service Call 994: Error in some cases.
Chosen Solution Somehow my tablet overheated it’s in its case but somehow it overheated and raised a little it’s still encased. I can’t afford to get new tablet no insurance.Its still working is it ok I still use it but unplug to not over heat it. @kungfuwomn , if you are saying your tablet gets hot, and the tablet looks like its expanding or starting to bulge, then you have a battery problem and it is very dangerous, as it can explode and cause fire....
Chosen Solution Soon after turning the set on, the color and pixelation become all distorted. Hi @sithlord , What is the model number of the TV? What is the signal source that is connected to the TV, an antenna or a “box” of some description? If an antenna: Is it (or the antenna cable) near an electrical appliance e.g. a air-con unit, other electric motor etc? If so it may be faulty and be emitting strong EMI that is being picked up by the antenna (or cable) and causing interference to the signal ....
Chosen Solution Hi I have a 2011 MacBook Pro 17 inch. There was a spill in June I opened it and dried it did not see any liquid … But forgot to look at the sides where it might run off the keyboard.. Now here in august it chimes and then goes into a reboot loop. We ruled out the hdd at the apple store and they saw the liquid indicator was on....
Chosen Solution Hello you guys, i have some troubles with an iphone 6s screen, i wanted to know what i might did something wrong here, i buyed a iphone 6s screen and i assembly all the parts together, i put my screen in to place and HURRAY it works, but after a few minutes when i was working on it , i start to notice there is a scroll problem and also when swiping its some times stuck....
Chosen Solution Hi everyone, I have CUH-1000 series PS4, and its Blu-ray drive is not functioning properly. It loads and plays the games in the end, but you have to eject and reinsert the disc to launch the game if you let it stop when it’s already in. Also it doesn’t read the discs as it should, when inserted it spins and stops few times, like it won’t read the disc, but then picks up and reads it....
Chosen Solution yes I have a 2004 grand am and she was running just fine and then today I got up to go to the store and went to start my car and got nothing. Checked the battery it’s good checked the starter its good I have power when I turn on the key but she does nothing as if she was not in park sort of speak but when I took her out of park put in nutural and back in park I got the same results nothing....
Chosen Solution I can’t get the device to power on. . Tried unplugging everything and still nothing. … help please Hi @lafl.nals, The computer is in a sleep state. Press a key on the keyboard, move the mouse, or press the power button to resume normal operation. If this doesn’t work there may be a problem with either the systemboard or the power supply
Chosen Solution I recently started disassembling a family member’s iPhone, I have taken out the pentelobbe screws and opened the display, the back metal plate didn’t come out with the front of the phone, what do I do? That’s a sign that the screen has separated between the backplate and the frame. This is usually something we’ll see when dealing with lower quality aftermarket screens. You will have to pry the plate out of the metal clips along the edges, preferably with a plastic spudger-like tool....
