Posts

Chosen Solution Hello, I have a refurbished iPhone 6s Plus and my FLASHLIGHT, CAMERA FLASH, AND SELFIE CAM have NEVER WORKED. NOW RECENTLY, my phone stopped charging! I even put in a brand new battery and still will not charge, so now dead! I want to fix and do not want to pay someone else to do it. What are the names of the parts that I need to change? i have ALREADY ordered a “Afeax OEM Original USB Charging Port Dock Connector Flex Cable + Microphone + Headphone Audio Jack Replacement Part for iPhone 6s Plus 5....

Chosen Solution Led lights flash but when I unplugged the main board they stop and the back lights will come on but there is no picture or sound. As soon as I plug the main board in the back lights start flashing, they come on then get dim then off and keep doing it. The TV model is a Samsung un65nu6900 4k Hi, If the backlights stay on when the mainboard - power board cable is disconnected at the power board end, check that the voltages on the power board cable connector where the mainboard cable was connected are as printed on the power board near the connector....

Chosen Solution So moving the optical drive from the laptop is no issue with future use of it as an external? It will function as if it was still internal? I recently got an adapter to install an SSD in place of it (I almost couldn’t pass it up - it came with the adapter, SSD, and enclosure to move the optical drive to use externally). I’ve been wanting an SSD but they are costly when you go to a larger capacity, especially since you can only have one HD in a laptop....

Chosen Solution Why am i unable to update my phone from its current version 4.4.2 to say 5.1 or 6.0 . Every time i try via Setting and Wireless update it keeps saying my system is upto date sounds like a motherboard issue The answer is simple: BLU never released an update for that phone.

Chosen Solution Hello, I have problem with my iphone 6. Its all okey, but when i plug in home button flex wire phone restarts itselft and doing it over ant over. What can cause it? I tried change home button wire, nothing change. Also tried unplug home button and plug to motherboard only that flex home button wire and its restarts again. Connector looks good, seems like nothing is broken. Thank you...

Chosen Solution In the A2116 teardown (the base model with no Fusion Drive), the connector for the Apple blade SSD is not loaded, and hence you cannot upgrade the miserably slow hard drive to a blade SSD. Question : Could you upgrade this just by adding the SSD connector, or are there other components required to support the SSD that are also not loaded? There are quite a few parts which you would need and the SSD connector is custom!...

Chosen Solution Dear everyone, I am from China, just got a cheap iMac G5 logic board from a dead 20" model(A1145), I am trying my best to get it work again, I have modified 2 heat sinks to get them fit the original heat tube place. now the biggest problem how to power the board with a ATX PSU, I have googled for some while but with no luck, all I can find is how to power a first generation G5 with a ATX(http://jimwarholic....

Chosen Solution My iPhone fell in the toilet only for about 10 seconds. I took it out immediately and put it in rice overnight. I woke up to see that one of my cousins played on it while I was sleeping because it was out of the rice. I was getting notifications because I could hear it, but the screen was completely black. I left it in rice for another day and the screen still is black and I can here notifications and calls....

Chosen Solution When I first bought the headset it was working perfectly fine but I think I may have damaged the bendable microphone and now it only detects sound if I bend it in a certain way. Any easy fixes to this issue? Nug Get no easy fixes. You either have some broken solder joints on the mic or a broken cable in the boom. You will have to try and disassemble it and most likely replace the wire....

Chosen Solution Help get SPen out of phone? Smack the bottom of your phone or lightly hit it on a table, it should come right out when you shake it! Tweezers? Here is a video of someone getting one out: https://www.youtube.com/watch?v=zA5xYT-x… I used the old-type iron twist serving to prepare a hole in the wood plate for screwing-in the screw. I think this is the best solution!

Chosen Solution I just replaced my glass and led, now the display keeps blinking on and off. Did I miss something or connect something wrong? Release the LCD screen flex cable connector, check whether the connectors and pins are good, clean the connectors then reconnect it.

Chosen Solution Washer fills, agitates no problem. then the washer will not spin rinse or anything else the washer is done. this is the same on all 3 different cycles. There is no hum like it wants to go or any sound at all. Timer? Motor? Update (10/13/2015) model 110.20922990. I don’t believe it is a clogged drain. Because after you get the timer past the wash cycle on any of the different wash cycles, there is nothing....

Chosen Solution Hello All- I dropped my XB1 down a flight of stairs and amazingly enough it still works, however one of the wires that connects the wireless module to the RF board broke, pulling the connector off of the RF board and the end on it was hanging on by a thread. The controller seems to use multiple communication methods so it still works, but only at close range and disconnects/reconnects often....

Chosen Solution Got a Nintendo Switch LCD FPC connector that is damaged and I need to find a compatible replacement from mouser, digikey, or something like that. I am hoping someone out there can help. I have attached a picture of the FPC connector (Taken from here at iFixIt) And here is a photo of the entire board. Thanks! Unfortunately, I don’t know of anywhere to buy those. Your best bet may be to buy a broken motherboard or console off of eBay....

Chosen Solution My screen is cracked and I need it fixed. Can I send this somewhere to get it fixed? RCA TABLET charlottefe iFixit does not do repairs. If you feel you can not fix this yourself, I would suggest that you check a repair service online that has some good customer feedback etc. and contact them. Otherwise check this disassembly RCA Voyager II RCT6773W22 Disassembly and this video for the repair....

Chosen Solution hi , my iphone x not working after remplace lighting port , i haven’t basebande fw and itunes give me erreur message ‘‘itunes could not check fort an update of carrier settings for your iphone an unkniwn error has occurred “ , constant searching network , reboot after 3min , you have an idea ? thank you for your attention The first thing you should do is to double check your work....

Chosen Solution When I turn on the monitor, there is no display, but when I Turn it off and on , the display shows the desktop information image for 1 second then go off. What is the problem with the monitor? I´ve seen this before, and the problem was a couple of damage capacitors. You need to disassembly your monitor and check the power supply, looking for anything out of the ordinary, like faulty capacitors (They usually looks swollen in the top)....

Chosen Solution I have macbook air 820-3209 (Mid2012-A1466) that work with charger with no green or orange light and, work with battery but it can’t charge it (FYI the icon on the barre indicate that the battery is charging but in realty the battery not charging ) Mac seems to have a charging circuit issue and there’s no out of the box solution for that. If you’re sure the battery is in good working order, all that’s left are I/O board you may try to replace yourself and if that fails, to repair or replace the logic board....

Chosen Solution Hello! I have a macbook pro M1 that had a bad logic board, making a popping noise when plugged in. I have replaced the board, and am still getting no power. The popping noise stopped, but I am not sure where to go from here. I have ensured everything is plugged in, and I am sure that nothing is missing. Any ideas? After randomly disconnecting the display, the computer booted as normal....

Chosen Solution I just recently picked up a 2007/early 2008 pre-unibody macbook pro. The hard drive was taken out by the previous owner, so I bought an SSD to put in there. I opened it up, and installed it correctly. It was a transcend SSD370. After I put it back together and started to up with an install disk, disk utility doesn’t see the SSD. Am I using too new of an SSD for this computer/os (10....