Posts

Chosen Solution My rechargable earbuds have stopped charging altogether. The last couple of times I have chared them for the hour and a half charge time and they have only played for 5 min before dying. Now absolutely nothing. Is there anything I can do to save these bad boys from the e-graveyard? Hi @mrpardoski The House of Marley has a 2 year limited warranty (in the USA, it may be different if your location is different) on their products I suggest that you verify that the earphone’s warranty period is still valid for your location....

Chosen Solution Hello, my iPhone 3G is stuck on the apple logo and then shuts off. It only turns on with a power cable and shuts off once i plug it out, I searched the internet to see if ot works without a battery but i didn’t find any answers. So if it isnt a hattery problem, I don’t know what is. Any help is appreciated. Those are the classic symptoms of a bad battery....

Chosen Solution I have this iPhone 6 Plus that refuses to turn on. So far I’ve replaced the charging port and the battery and it still won’t turn on. iTunes does not recognize it either. I tested the logic board through the FPC Connector using a multimeter and the reading gave me a voltage between 3.5-4.0. According to a YouTube video, this means that the logic board is still alive and the logic board can be charged....

Chosen Solution My home button was not working, I decided to open my Ipod touch to replace it with a button of another device. While opening this, I removed the needed screws to access to the button. But there was a broken screw I couldn’t remove with a screwdriver cause it was round in (probably the guy that built the ipod has hustled the screw, the screw became round and so I couldn’t use a screwdriver to remove it)....

Chosen Solution my netbook keyboard stopped working well.it mixes the different keys up,some of which are absent.how do i fix it? i’ve tried rebooting it and the drivers are working well so i can’t tell what went wrong. It may be a software fault - you can try uninstalling and reinstalling the keyboard driver or doing a factory reset to make sure its not another application causing the problem. If this fails it is probably a hardware fault (e....

Chosen Solution Hello guys, So an hour ago I tried to use something on my hard drive and my laptop won’t read it anymore. You can feel the hard drive running but the light on the hard drive where it usually shine wasn’t shining. I tried two of my friends laptop and both didn’t work. I tried switching the cable and it didn’t work either. This hard drive is quite new I just started using it about 1 month ago(but bought it in the beginning of the year) I never really bang it or drop it....

Chosen Solution My PowerBook G4 does not recognize internal hard drive. when i boot without cd it will not boot and i will see a question mark on the screen and a small icon that represent mac os. i have Mac OS X 10.3 that i used on my old iMac. when i restart the computer and press ALT it will bring a screen only with cdrom and it will read the cd, when i press enter to install it will reboot and bring a white screen with a Traffic sign that says (do not enter)and ends there....

Chosen Solution what might be the problem and how can i repair it? Run an audio troubleshooter to find and fix errors. Open a command prompt by typing CMD in the Search box at the bottom left of your display. Select “Command Prompt App” from the list of options. Then copy and paste %systemroot%\system32\msdt.exe -id AudioRecordingDiagnostic into the prompt. Follow the prompts to select your microphone and troubleshoot it.

Chosen Solution I have tried a force reboot but my iphone 4 still doesn’t someone please help me The LCD may be bad. Have you tried a new screen or “tester” screen? Is this after a screen replacement the touch didn’t work, or did it just stop working the original screen? If it just stopped working, then you will probably need a screen replacement. sounds like a bad digitizer consider replacing or invest that money towards a newer iphone...

Chosen Solution Hi everyone, I had a problem repairing a MacBook Pro 13" Mid. 2012. First I was without backlight after cleaning some rust with a toothbrush and alcohol on the logic board I’ve detected a small fuse not working, so I made a bridge to test. But now the Mac wont turn on, not even the fan/nothing. After watching it close I’m seeing like something is missing on the board....

Chosen Solution I just bought a used HP Envy m6-n113dx for my son. Apparently, the previous owner spilled soda or something uber sticky on the keyboard. How do I replace it? Thank you! download the service manual from here. Page 60 will show you how to replace it. Note: When you download the manual, it gets downloaded without an extension. Add the .pdf to the file name so you can open it with a PDF reader....

Chosen Solution Hey guys, I have an iPhone 7 with the new iOS 11.3 The new battery health (beta) indicate my battery health is 99%. On the other hand battery life with a third party app in the App store indicates it 100%. What should I trust? My mobile was bought 29th January 2018. Is that possible after 2 months using this mobile’s battery decreases by 1% ? I’m freaking out!...

Chosen Solution I was planning to reinstall Windows 8.1 on my laptop. I did by using a usb flash drive by using the legacy bios boot mode because it will not boot from it on uefi. It Installed perfectly but every time it started up it will be in legacy bios. 2 days after I tried to start it up by came up with the message os not found. I have tried f2,f8, f10 and f12 neither have worked....

Chosen Solution first thought macsafe adapter because it had no light. tried a known good adapter, same. reset pram, smc, tried to boot w/o battery. got the light of adapter ti light, but no boot. exchanged ram modules for known goos ones. same result. ideas? I have experienced similar problems with MacBook Pros in the past. I find that it is the DC-In board within the computer. The result of this is that no power can reach the computer therefor it cannot charge, and if out of charge, it will not respond to anything....

Chosen Solution Hey guys, my friends just gave me this macbook pro, when i plug in the charger, fan automatically start spinning slowly, no chime, i havnt even tapped the power button, and when i try to shut it down by pressing the power button for 10 seconds, its dosent turn off (fan still keep spinning) Only way i could get a response from the macbook pro, is if i press the power button (located at the keyboard) and THEN plug in the magsafe 2, and keep pressing the power button, after about 5 seconds fan start spinning extremely fast and theres a chime, no display though, and if i hold the power button it shuts off…tried resetting SMC, PRAM already to no avail… one odd thing to notice is, when i unplug the battery, and plug the magsafe 2, fans dont spin at all, and if i press the power button, i get no response from it as well… i usually do small repairs like simple LCD or logic board swapping, sometimes, actually most of the times swapping RAM or Processor fixes the laptop, but ram and cpu is built in in the model…....

Chosen Solution I have a 2002 Mitsubishi Lancer OZ rally 5 speed. The engine runs fine but when i put it in gear it has a bad slow acceleration, and little to no power through any gear i put it in. and if i try to push the pedal to the floor it acts like there is nothing there and the RPM gauge redlines and the car revs high but the car doesnt move....

Chosen Solution Hi, I bought a Multimeter from JayCar Electronics today Digitech QM1529 DVM. It works fine but one thing doesn’t work, the non-contact voltage detector. When I try to use it with the DVM it comes up with - 951 when I’m not even holding it up to something! I hope there is a fix Thanks :) Sorry you have a bad unit you’ll need to return it for an exchange or buy another probe....

Chosen Solution I have an Visual Land Prestige Elite HQ 10 inch screen tablet. My touch screen got broke. Can anyone tell me where I can find the numbers to replace the screen. Thanks for any help you can give me. Hi @polarbearsbaby Maybe look on the digitizer cable i.e. cable attached to digitizer, for any info or labels on it. Here’s a zoomed in image from Step.16 of the ifixit Visual Land Prestige 10 Digitizer Replacement guide to show where it might be....

Chosen Solution We are getting oil stains on our cloths after washing, probably a bearing but how do you fix it? Oil spots on your laundry could be the result of a bad seal around the agitator shaft. This causes water to leave the tub and run down into the transmission. Since the transmission oil is physically lighter than water, it leaves the transmission and floats into the tub. At the same time, water stays in the transmission & spin bearing areas....

Chosen Solution My laptop started shutting off when in use and wouldn’t turn back on until it cooled down. I put my small desk fan in front of it to see if that would keep it cool enough to stay on and It Worked! So my assumption is, replace the cooling fan, right? I’ve never opened one up before but I am very “handy with home repairs”. Even so, would prefer to have a guide for this if possible....