Chosen Solution I asked many repair shops and they rejected service due to the BLU brand . Please help me raghu thavva sounds like the only thing you can do is to replace the LCD yourself. There are no complete guides out there but you want to use these guides to get close. The display is not to expensive and available at places like this as well as others.
Chosen Solution I have an iPhone 6 that had a mashed sleep/wake button that was no longer able to move. The phone was powering on but the screen would stay black (not even a back light). I’ve replaced the button/ribbon cable thinking that it was stopping it from waking the screen. The new sleep/wake button and ribbon cable are working (iTunes recognizes the device is in DFU mode after doing the hard reset with the sleep/wake button and the home button) but the screen is still staying black - even after doing a recovery update in iTunes....
Chosen Solution So I went ahead and replaced both my screen and my battery for my Iphone 6s. Screen works fine with no issues, however, I have not been so fortunate with the battery. The battery refuses to charge, as well as the phone randomly power cycling. This occurs both on and off the charger for no apparent reason. I don’t have the old battery. I have made sure that the ribbon connector for the new battery has insulation between itself and the protective piece that goes on it....
Chosen Solution When I turn on my heater the temperature drops and my check engine light comes on. I turn off the heat and let the car idle and the light turns off, but the temp goes up to about 175 degrees. I’ll drive the car and the temperature will drop and then I will park it and the problem seems to go away. What would cause this? Joshua, When the car cools off, check the coolant fluid level....
Chosen Solution Randomly my computer froze and the mouse won’t move on screen. I can’t pull up the task manager or get anything to happen. When I press the power button, it will go to a black screen, but when I hit it again, it comes back to the same frozen screen. The computer may be taking in too much input or there could be a malfunctioning program or application. Since you can’t restart the computer on-screen, the best way to fix this is to do a hard reset by either holding down the power button until the computer totally shuts off, or by removing the battery....
Chosen Solution Hi! I recently got a new modem from Motorola. I’ve plugged it in and tried to use it but the LED lights do not light up. I can’t tell if the modem is doing anything. Help! Make sure device is plugged into an electrical outlet, and make sure modem is fully connected to a working power source. The device may be in standby mode in which the power light will not turn on....
Chosen Solution “If no blinking light, unplug the refrigerator.” My fuses are ok. OK, then what? LG Model=LSXS26326S My symptoms=No cooling in fridge or freezer. Condenser & fan below are running. Evaporator fan in freezer/fridge runs – seems like only when I open the freezer door??! and the air is not so cold coming into the freezer. I touched the coils below and they are cool to the touch, upper parts are cooler....
Chosen Solution So I replaced the LCD ,Touch digitizer and home button and when I plug in the charger, the screen shows the Apple logo and then turns off and repeat over and over again and .I don’t know why, the battery has not been charged in a long time, like a couple months so that could be the one of the problem ‘s but please help. Presumably you changed all of these parts because the iPad took some physical damage....
Chosen Solution I Had My iPhone In The Car And i Had It Charging Via The USB Port Provided In Cars And Just Out Of A Sudden It Went Blank And Won’t Turn On Or Charge And I Carry It To Fix And A Guy Said I Need A Power IC but I’m Kinda Confused Cause There Are Two A PMIC( Power Management IC ) & A Power IC (U4500/U2 CHIP) I Don’t Know What To Buy Or Do....
Chosen Solution Where i can find a keyboard? how can i change it ? Thanks This model does not use screws (except on the edges) to hold the keyboard in place, but brad type of pegs. You really have to be a good tech to change just the keyboard. Apple recommends a complete upper case replacement. There are some options here but we need to know why it got melted. Liquid spill?...
Chosen Solution My N64 has no red light or picture and makes no noise when turned on. It is intact though. Did I turn it on and off too quick or is it that I turned it on with out a controller in just once? I never did that after. Please help and tell me how to fix Already tried another PSU ? Is there even power coming in ?
Chosen Solution My phone get water damage. It stops working and motherboard stops responding as per advised by experts. Is it possible to do some repairs done on the mother board or it’s useless now ? Thanks NZ Tech Solutions you want to treat this like you treat any other water damaged device. The very first thing you want to do is to not try to restart, sync or otherwise trying to use the phone....
Chosen Solution We had power failure and now the power is back on my SAMSUNG TV will not start, what do I do how do I fix it? Samsung TV’s have had issues in the past with swollen caps on the power supply. I had my caps replaced under an extended warranty years ago. Im not sure if this program is still available, but it’s worth a shot. I can almost guarantee that’s the issue with your TV....
Chosen Solution My screen is black while the laptop is on. I have tried pressing every key on my keyboard any clicking around with my touchpad, but nothing seems to be working. The first step for fixing a black screen is performing a hard reset. To do this, hold the power button down for a few seconds until your TouchSmart turns off. After a few seconds, hold the power button again to turn your device back on....
Chosen Solution Hey guys! I had a problem in my laptop that required to open up the device and the problem was that it was totally the first “surgery” I conduct ..so the thing is that I somehow managed to plug the screen motherboard connector in the wrong way around..and now the screen is all black …so can anyone tell me ..what could have happened and if this could be fixed?...
Chosen Solution My Starbucks doesn’t show any sign of life. The light is green for water ready. Nothing happens you press the button for making coffee . I can’t even here the water boiling. Can you help me out please. Hi, If you can read a wiring diagram, this answer provide by OldTurkey03 will probably be of help Is there a wiring diagram? (click on the wiring diagram to enlarge) Here is the Ifixit link for Starbucks Barista Repair....
Chosen Solution I have a Pafltzgraff Monaco stovetop tea kettle. It no longer whistles. Is there any way to fix it? I’d buy a new one if I could find that pattern. My first question would, does it fully heat up and boil? Steam vapor blowing out causes the whistle. Has the top been damaged or lost any parts? I soaked the top of my teapot in 50:50 hot water and vinegar to remove hard water deposits....
Chosen Solution Help! Does anybody have this? I need 11 cases to finish the flooring on our house. We did the master bedroom about two years ago and it’s been discontinued. We haven’t been able to find anything comparable . If you have it or know what comes close to it, please, please let me know. This is my first time on iFixit so I don’t think I have the right “device” but I couldn’t find “flooring”....
Chosen Solution The night light over the range on my LG LMVM2075ST Microwave only works on the High Setting. There is both a left and light bulb which both work on High Setting, so it’s not the bulb. Hi, The problem is either a faulty cooktop lamp ’low’ relay (there is also a cooktop lamp ‘high’ relay- both relays provide power to the lamps- depending on which one is operated), a faulty diode on the control board (this diode affects only the ’low’ relay circuit to the lamp) or a fault in the control board that is causing the ’low’ relay not to operate or current not to flow to the lamps....
Chosen Solution Folks. I’m looking for some help or suggestions here on fixing my mid 2010 MacBook Pro. I ordered a replacement WiFi/Bluetooth module and cable from iFixIt and still nothing. I tried to reset PRAM and the SMC controller and I’ve even rebuilt this machine from a new drive (SSD), thinking something with the software was hosed. Does anyone have any suggestions on fixing Bluetooth? The WiFi portion works fine, but I consistently get the “Bluetooth not available” message....
