Posts

Chosen Solution Customer got just a little liquid on M1 while it was in a back pack. Opened it up and found just a couple of liquid spots (not on logic board). Machine boots up but will not take password. However it will take password in Recovery Mode. This has me stumped UPDATE Ran Disk Utilities Repair & re-installed Monterey. It now takes password, looks like it is rebuilding system, will know result in about 20 minutes....

Chosen Solution Pencil stopped charging via the cable and adapter, which I had to buy! Tried to charge by plugging it into tablet and it worked fine for awhile. Could be a coincidence, but upgraded to 13.4.1, now pencil says 3% of battery life. When plugged into tablet , it charges extremely fast, but it’s not charging at all. It still says “pencil is at 3%” , so I’m debating buying another one....

Chosen Solution So I want to start recording games for YouTube but when I download any screen recorder onto my Blu Studio Selfie it says that the phone doesn’t support recording. Is there a way I can record anyway? Hi @obvdan , According to the User manual for a Blu Studio Selfie it can take videos using the phone’s camera app. Scroll down to the Camera section in the manual for details....

Chosen Solution Hey all, Just thought i would get a second opinion here, S5 got a little bit wet, the whole phone works no issues there apparently there friend got it to work. only thing that doesn’t is the touch. I am thinking a new screen is needed, is there anything else i can try to get the screen working. Already done a factory restore :) Hi @simong93 Did the friend say that the phone was cleaned correctly, and that any apparent corrosion and water remaining in the phone had all been removed?...

Chosen Solution Samsung LN46C6400 46 inch LCD LED TV My picture is perfect but yesterday the sound went off. When I use the remote to change sound level or to mute the sound, nothing shows on the screen. Tim Davidson first you want to check your menu to make sure that it is set for the TV speaker. If everything is proper then you want to disconnect everything from your TV....

Chosen Solution My Flex 3’s battery died a few months back, and certain key switches don’t register anymore. I’ve been running it from the wall and using the touch keyboard, but in the last few days it’s been shutting down suddenly and randomly. I’ve been keeping it elevated and above a fan. It remains cool to the touch and still loses power. Is there anything I can do? It is in warranty, should I take it in?...

Chosen Solution It seems like two of the ram slot in my computer won’t work. There are 4 slots in this model and I currently have the computer working with a 512MB chip in the very top slot, and another 512MB chip in the very bottom slot. The two middle (Inner) slots are having problems. If the ram is put into the inner slots, the computer wont start up at all....

Chosen Solution When I press the power button, instead of lighting up the screen on my device remains dark and black? Can this be fixed or do I need to replace something? Your Jetpack might be dead so plug it in and what a little while for the battery to charge and try again. If your battery is charged, indicated by the power button lighting up green, and your screen still is black then your screen might have been damaged and needs to be replaced....

Chosen Solution The arm is off, its been beheaded, and down an eye :( This is the only childhood relic i’ve held on to, my mom gave it to me when I was 5. I have the eye mostly intact, but I don’t know how to reattach it. I can hand sew some. I tried to stick it in through the front, but it doesn’t look right, stands out too much and doesn’t have the “furriness” around it....

Chosen Solution Hello! I have just replaced my iphones screen with the Wifi Antenna and the Flex cable so it can gain back some wifi. But after everything was fixed. I turned it out and my phone can’t connect to my carrier. I need help on what part to replace. The wifi seems to work fine, it’s just the signal to my carrier. Thanks in advance! Just need help on what went wrong here....

Chosen Solution Phone was having problem with speaker, so tried to change the amp ic. still having same problem. then i tried to reflow the audio ic. but phone is dead after this. current not exceeding from 100mamp. and showing short on pp_soc, pp_gpu but it is not full short. i measured the resistance on both sides which above 20 ohm and 45 ohm. please give your valuable suggestions and guide me to resolve this problem....

Chosen Solution It started for a second then I heard a pop and it wouldn’t start again and the lights nad the entire electrical failed and I can’t start it now how do I fix it Never mind after some tinkering I fixed it

Chosen Solution My phone is stuck in recoverty mode and itunes keep giving me error number 4013, i even tried with 3utools but it is stuck at 19% in restoring Did anything happen to the phone prior to this? Error 4013 on the iPhone 6 can be a corrupted NAND IC. That would require a micro-soldering repair and re-programming of the NAND. It also means data loss. However before going there, you could try ReiBoot to see if you can kick it out of recovery mode....

Chosen Solution I need anyones help right now. So here is the lowdown: I have a jailbroken iPhone 3GS running 4.2.1. Since it is tethered, i am forced to boot from redsn0w because I also have Winterboard installed which prevents the device from booting; just staying at the apple logo screen. To boot from redsn0w, you must put the device in DFU mode. <— Thats my problem. The home button is not functional....

Chosen Solution Tablet is brand new. I turned it on and all I see is Android boot failed. Try a" wipe cache partition" this will allow a clean boot thisvideo showshow to do a factory reset but we want to do a wipe cache so instead of selecting the factory reset as he does in the video select wipe cache and carry on from there . This should help but it you find no joy then you will need to do the factory reset as in the video but be advised you will lose all your data ....

Chosen Solution I was given this MacBook Air by a friend after it started failing on her daughter (who was not very descriptive). The first time I turned it on it came up perfectly, but after that never got it to start again. Symptoms: no audible beep on startup no visible display - no apple logo, no backlight, no nothing. plugging in external monitor during startup displays nothing. SMC Reset DOES result in magsafe connector light change....

Chosen Solution Hello, I am having an issue with a MacBook Pro 2018 after replacing the keyboard. I have no keyboard or touchpad. Both were working before the replacement. I have tried 3 other keyboard but still the same. I am unsure if it’s the flex cable between the logicboard and the keyboard itself which is causing the issue as I do get fan spin which is connected to the back of the keyboard....

Chosen Solution I have a Panasonic 4k Blu-ray player, which works fine when playing 4k Blu-ray’s, but when I play normal Blu-rays there is no sound, there is sound on the menu/title page but when the film plays there is no sound. Sound will only play if audio description is selected. The only other device I have is my BT youview box, no sound bar or anything of the like Does anyone know how to fix this?...

Chosen Solution My phone is not receiving a WiFi signal anymore, so how do I find the WiFi antenna and is it possible to extend it to get a better signal like solder a wire to it possible. This may help https://www.youtube.com/watch?v=Lc_esCrc… Extending the antenna is not a viable option @jmarion , Jonathon , Below find a couple tear down videos that should get you into your phone where you could check and clean the connections before replacing antenna and try....

Chosen Solution Have a 1974 suzuki lemans 750 2 stroke and would like to disable the oil injection and run premix. Is it ok to do this or will it harm the engine Here is what looks like some quality advice about your topic…. http://www.fixya.com/motorcycles/t124352…