Posts

Chosen Solution @refectio i have an issue with this iphone 6. when i got it, it wouldnt boot. on dc and charger with battery disconnected it took around 0.23 amps. i removed tristar and tried dc again and got apple logo. put a new tristar on and as soon as the amps reach around 0.83 the phone restarts. it now eventually boots to the home screen after a few minutes but it wont charge, not showing the lighting symbol in the battery and it stays at 1%....

Chosen Solution I have just been given this by my sister. I have had the train on charge for few hours but nothing no led, music, movement, just nothing all the components and connections look OK. How can I find the issue to fix the train. Thanks Here’s a teardown of the train. With the charger unplugged, set your multimeter to DC Volts and measure the voltage of the battery at the battery terminals....

Chosen Solution I am looking for someone who can replace the battery in a Pebble Steel. I have 3 Pebble Steel watches that need to have their battery replaced. I will pay for the service. Sincerely, Dan Svenconis Hi, You may be able to replace the battery yourself. Here’s the ifixit Pebble Steel Battery Replacement guide. Here’s a link to just one supplier of the battery. It is only shown to give you an idea of the cost of the battery....

Chosen Solution Hi folks! Today I received back my MacBook Pro 15" from maintenance service due to water damage. The technicians replaced the upper case including the keyboard, battery and trackpad. The trackpad may be a refurbished item because there is a little uneven path on it . I won’t bring it to maintenance again because I have to wait minimum two weeks again until themy ‘may’ decide to replace or not… and I expect they won’t....

Chosen Solution Charging port won’t charge phone You’re in luck. You can buy a daughter board that has it on it https://www.googleadservices.com/pagead/… But all I could find is a video for a 992 https://m.youtube.com/watch?v=hSCZuY3ywb…

Chosen Solution Hi, i have a problem with A750SN got stuck in bootloop. After i tried to enter download mode it shows me only “Power Reset or Unknown Upload Mode”, i have tried to connect it to Z3X and click on the “Reboot to Flash” the screen says OK but in the phone screen nothing is happening. I will write the whole text that apears in the screen of device....

Chosen Solution My dryer was working fine yesterday but today itwas hard for it to move a little weight.but when i turn it for a little with my hand then it is working fine my dryers model is INDESIT IDC75 . That’s the oink to the video https://drive.google.com/file/d/17rY6oQO… Hi Vagelis, This sounds like you have a bad starting capacitor. When they fail, the show symptoms just like this. The capacitor is located in close proximity to the motor inside, so (if you’re comfortable with a little DIY) you can open the dryer and inspect....

Chosen Solution recently my phone my battery becomes dead on having like 45% or 20% charged and then yesterday when im trying to charge my phone the apple logo appears and then it goes off again tried to look for some solutions on google it says hold home button for 5 sec then the power button at the same time while plugging the wire of the charger with the computer to connect with itunes it has succeed to connect and then whether im clicking on update or restore it says waiting for iphone and the charging logo appears on my iphone, nothing happens and its failed at end, so please tell me what to do....

Chosen Solution Are parts still available for this? @djose since you already replaced the charger and the battery I suggest that next you change the SUB PBA, also called the daughter board. That is the circuit board that has the charging port etc. mounted to it. Even so we do not have a guide for this, You can take a look at the teardown Samsung Galaxy Note8 Teardown and it should get you there....

Chosen Solution why does my whirlpool gold refrigerator getting colder than the temperature i am setting it at?…I tried cleaning coils That refrigerator thermostat contacts are probably sticking causing it to get colder than it should. That’s common on that unit. Normally there is not an exact setting just some numbers. During the winter my homes ambient temperature is lower. Thus I turn the temperature to a lower number to raise the temperature....

Chosen Solution Hello, If i plug the TV power cable in 2 sec back light is on and the logo Bravia appears on the screen for about 6sec and then back light goes off, no image, no sound. Power button switches green LED on and off, the SONY front panel logo as well. The remote control switches green LED on and off. If I unplug the TV in stage off and then plug it again, and try to power on, I can’t see any logo and back light is off as well....

Chosen Solution I already replaced the ac adapter with a new one and the machine still won’t turn on. I don’t use the unit with batteries at all as it drains the batteries very quickly. the screen remains blank. any suggestions? Update so i tested it out today with batteries and the unit turned on! Which makes me think something is wrong with the metal prong that attaches to the adapter....

Chosen Solution I have a crack running parallel with the dock connector. It is a bout a 1/4 of an inch running up the phone. I did not find on you site a back cover. Could you please let me know what the cost would be, just for the cover. I will install it myself Thanks, Carol Benedict cbenedict@satx.rr.com Here’s a link for the backcase which is available here with the silver bezel....

Chosen Solution I recently bought an OEM battery from you in january 2018. it was working wonderfully until the last 3 weeks when i noticed the battery drained faster and faster. now the battery is visibly bulging and does not hold a charge for more than 2-3 hours. at times, it shuts down even when it says 50% charge. is there a replacement or warranty on your products? @nghiaho forum is not related to the store....

Chosen Solution I replaced my battery and trackpad, and everything was fine (computer booted, charged up the new battery etc.). Then, I noticed that the trackpad was too hard to click, so followed instructions to make it better (turning the star-shaped screw). Upon closing the case after this, and trying to boot, the computer started to do so normally, then within a second or two, stopped and went dead. Now, no MagSafe green light, no boot at all....

Chosen Solution My red warning oil light came on. I have not been able to locate the area to check the oil or a port to add more oil It is a 1991 Club Car Here’s the owner manual for a 1990 Club Car. It will tell you how to check and add the oil and what type: http://www.clubcar.com/content/dam/cc-co…

Chosen Solution Hello - I didn’t see any guides tackling this particular issue: My on/off switch is not working. I’m ready to change carriers, and I need to turn my iPhone on/off a lot during jailbreak/unlock. When I apply pressure to it, it simply doesn’t turn off. I’m thinking some lever is not making contact or something? What is this system like, and is it worth trying to fix it myself?...

Chosen Solution While playing a game on my iphone 6, the phone started heating up. Could not close the game even by pressing the home button. Suddenly the screen went blank and the phone continued heating up. Then I removed the SIM and it gradually cooled down. Thereafter the phone does not start and neither does it get charged. Any clue on what could have been the problem? Had taken this to the apple authorized repair shop, however, they did not look at the issue, only advised me to get a replacement by paying almost $400....

Chosen Solution So after replacing my LCD screen once, my front, back camera, and home button were damaged during repair so today I decided to replace them. I bought the parts from amazon and installed them with no problem. However, when I put everything back together I have no response to the phone but if I plug it into my computer it is recognized. If I hold both the home and power button, it resets on iTunes; but nothing appears on the screen....

Chosen Solution I use my MacBook as a desktop computer, always with the power cord plugged in. A month ago my quite old magsafe did that little pop and light went blank, happened years before so I knew I had to replace it. I bought a new one. One month in all is fine, until yesterday. I accidentally dropped my Z906 speaker which sits on the left edge of my desk near or on the magsafe....