Posts

Chosen Solution I have a MacBook, three or four months ago it fall water over it and since, the MacBook does not recognize its battery any more so I have to use it only with electric power. I took it over service and they told me that some “electronic component” is not working. Where can I get the part that alows the computer to recognize the battery again? (I don’t know the name of the component) Thank you very much for the information you can give me....

Chosen Solution I got my laptop a bit wet today from the rain and when I brought it home nothing turned on. No fan, no hard drive, nothing at all. I tried the “take out battery and adapter and hold the power button for 30 secs” but that only made the power LED light come on and still nothing else. The battery light flashes orange sometimes then goes away when the battery is in and the power light stays on....

Chosen Solution Hello everyone! I seem to have a problem with my DS4 controller. It seems that my controller won’t charge but it still connect(light bar turns blue) to the PS4 when plugged it into any power source. The light bar also turns orange(which means it’s charging) but as soon as i unplug it, it turns off instantly. I’ve already tried the reset method, but it still won’t work. I also tried using different cables(even new ones) and still won’t charge....

Chosen Solution My imac 21.5 inch cannot turn on..nothing happen when I press the button on..I already check the electrity and fuse..what else I can do? How to repair by my self? Use almost any of the guides to get the frame off, this one will do: iMac Intel 21.5" EMC 2428 Power Supply Replacement Open it up and observe the LED diagnostic lights to the right of the RAM slots and tell us what you find....

Chosen Solution Well on itunes a window popped up and said ipod nano was corrupt, try to unplug. I did that and it has the time, battery power and a big lock on screen. How do I reboot it or start it again? Try following this troubleshooting guide from Apple to restore the software on your iPod Nano: The Five Rs for iPod nano (3rd generation)

Chosen Solution I’m having some trouble with my iPod video. It refuses to turn on when it is plugged into my computer, however it will turn on and charge when it is plugged into my car. When I plug it into the computer the Apple logo lights up, then there is a clicking sound, the iPod shuts off, and then the cycle is repeated. I thought it was the battery, so I replaced it....

Chosen Solution My TV turn black with no sound or picture. The power light is on. I openness the back cover and it seems all capacitor are in working order. Do I need to replace the BU board or power supply jpwinarto this sounds more like a power board issues. You do want to start by checking the power board voltages. Post some images of your boards with your question by using this guide....

Chosen Solution my note 5 got wet not much but now the back button is not working what should i do to get it back working If its just the back button then you can replace it and all will be right Samsung Galaxy Note5 LCD screen & USB board & Home button Replacement There is a small cuircut board that can be replaced They can be purchased on amazon or ebay....

Chosen Solution So early today my note 7 exploded while i was awake and i ran all the way downstairs screaming with my laptop. Do i need to restart it according to samsung? Andhy Peralta , Check out the links below, about recall of your device for just the reason you stated. Contact Samsung support USing 2nd link to get instruction on device return/replacement/refund. Good luck. I hope this helped you out, if so let me know by pressing the helpful button....

Chosen Solution Hi all, My IFixIt Pro Tech Toolkit’s cover/wrap is dirty. I was curious if I can wash this, and if so, what are the recommended settings? I was thinking cold wash delicate but I’m not sure. Any answers would be much appreciated! @thetekkitboss I used a regular short cycle. Worked well just skip the dryer, it’ll make the velcro grunchy.

Chosen Solution MacBook Pro 2008 15" Hi, When using my Mac Book Pro 15", the screen is flashing in negative and lines appear and disappear when I move the screen by trying to have a positive image. Sometimes, depending on the rotating position , it turns OK. Is it a screen problem or a driver problem ? I have the possibility to change the screen (got two spares), is it worth to do it and do you have a video ?...

Chosen Solution Sim card lost inside my tablet. How can i take my tablet apart? Hi @tooconfuzed , As you don’t state the model number of your LeapPad, here is a link to the ifixit repair guides for LeapPad tablets. They show how to open the tablet which should be of some help to you in retrieving the SIM card.

Chosen Solution My timing belt broke. I Don’t know where to mark it! Please help me . Hi Arnie, If you’re trying to replace your timing belt, there are usually timing marks on the crank and timing pulleys. Make sure the motor is at top dead center: You can rotate the motor with a socket on the crank pulley Check for top dead center by sticking an extension down the #1 cylinder’s spark plug hole....

Chosen Solution Since a few months, I’ve been starting to get the problem of my network not working, at all. I either can’t connect to any network, or it keeps giving the warning of “No connection”. When I restart it a couple of times it does work again, but I wonder what the problem is Windows Troubleshooter says there’s a problem, but they can’t tell what nor fix it. All my drivers are the latest version (Including BIOS, Intel and Asus drivers) I think it might be a problem with the network receiver inside my Notebook, but I’m unsure about that....

Chosen Solution I replaced my iPhone 6s battery after ordering a new one from ifixit.com. After following instructions to the T and a good install with no problems I plugged my phone in and charged as per the instructions. After removing the phone from the charger it was once again dead after 4-5 hours with no use and will not charge again. Had I have known that it would react the same way as the old battery I would have immediately backed it up on my computer!...

Chosen Solution I replaced battery because my daughter gave me her ipod touch 2nd gen to fix when I recieved it all it did when plug in to wall or computer was show a red bar in the battery and a lighting bolt underneaththe battery. I removed the old battery and replaced with one I bought from ifixit. I plug the cable into the usb and then I got the same red bar in the battery and a lighting bolt in the window then after about 3 minutes I get an apple in the screen but nothing else I have tried to reset I even removed the battery and replaced it again with the same results please any suggestions...

Chosen Solution Hi guys, I exchanged touchpanel for ne one and after then I figure out this problem with line which is completely dead for any touch. Do you have any ideas, where can be problem? I attached video below. Many thanks for any ideas! Touchscreen problem @alfoo looks like a bad digitizer. Return it for a different one.

Chosen Solution I recently replaced my nintendo switch’s USB-C port and tried charging it and nothing just a black screen, then i got a nintendo switch battery which was fully charged and plugged it in and powered it on and still the black screen, any ideas as to what might be causing this? any help would be greatly appreciated. Most likely one of the chips on the motherboard is faulty. Could be the M92T36 chip and or the P13USB chip or possibly something else but those are the two most common....

Chosen Solution Started car, went in reverse and when put car in drive car limped and no acceleration. Car check engine light came on. Car slowly rolled until I parked it again. Rested car for several minutes and started again and was able to accelerate to get home. Check engine light stays on. Could it be bad gas, clogged fuel filter? Your check engine light means that there is an error code stored that will tell you where the issue is....

Chosen Solution So I have a strange problem no on my iPhone 7. Suddenly out of nowhere it started using longer time to set up calls. And when the call connects, it gives no sound for me or the person im calling. Totally quiet. Does not help to use speaker phone or headset. Then if I try again some time later it will suddenly work as normal. Then it can stop working in the Middle of a call with some strange noises first....