Chosen Solution
My phone fell down with the screen facing the floor and got cracked, the tactile still working but is really hard to see behind the cracked screen. How do I replace the screen?
its really difficult to separate the LCD and the touch screen digitizer in BLU studio 6 HD d650a / d651u , I tried using playing card ,thinnest fishing line (very promising), to separate was able to remove all glass but realized that the lCD broke in the process my recommendation is to buy online a lcd+digitizer+frame online then to fix this model phone will take exactly 10 minutes and will involving removing the screws in the back panel only the lcd+digitizer+frame is approximately $65 regards dan
you will need a new digitizer to fix the screen places will tell you to get a new LCD but that is not needed if the screen shows up
Touch screen of my BLU studio 6.0HD D651u mobile phone is broken. Please help what should I need to repair it.
Here is the LCD with a Broken Digitizer in case someone with the digitizer wants to try and separate the LCD from it. The LCD ad is a “Or Best Offer”. Make an offer. http://www.ebay.com/itm/271946932295?ssP… The Digitizer is located here: http://www.ebay.com/itm/181794085093?_tr… if someone wants it. You will also need the UV Glue to bond them together. Here it is on Ebay: http://www.ebay.com/itm/UV-glue-LOCA-Liq… And you will need this: http://www.ebay.com/itm/Mini-Aluminum-UV… Here is a video on how others separate the LCD from the Digitizer: https://www.youtube.com/watch?v=M2rHnk2C… Hair dryer works very well. you need heat!
You can buy the parts on ebay it’s about 60 bucks but make sure you get the both the glass+lcd frame. Once you have the part it’s very simple to replace it. Turn off phone Turn it to its back n take off cover Takes off any screws you see Then you take your nails or guitar pick n in between the screen frame container and the body and go around till u get it off (u can tell where they are both separate) just be careful around the power and volume buttons. U don’t want to rip those off Once that’s done take off the the big black ribbon and a small ribbon, so taking off two (if u look at your new part you can tell which ones are they) Now you turn it over n heat that sucker up n use the same guitar pic to go around to take off the glass u Goin to have to do it over and over, then once that is off u take both the Glass n lcd out n put in the new one (there is a bottom ribbon sort of a tricky fellow but u must plug it in as well u will know when u see it). Then heat the glass one more time so it can stick to he glue again. Put it back together and your good to go.
My blu sreen broke has a long line running across it and i cant work the phone …who can i get to fix it
You have to get the screen replaced from BLU service center or you can buy new LCD screen online and get it fixed from mobile repair shops. However, I will suggest you to contact service center once and ask for the solution for broken LCD display.
