Chosen Solution
Hi there, I put a large load on this arvo on my LG Fizzy logic too loading 6.5kg #WF-T657. About 10mins into the 35min cycle it stopped and started bizzing!! No error code came up. I stopped it straight away and took the clothes out and drained it manually. I tried running another small load and the same thing happens. I tried once more with no clothes in and still the same thing. Has anyone else had this issue or have any idea where to start looking? Cheers
I’d first unplug it from the wall for five minutes to allow it to reset. Cause 1 Lid Switch Assembly The lid switch assembly prevents the washer from spinning when the lid is open. If the lid switch assembly fails, the washer may stop mid-cycle. To determine if the lid switch assembly is defective, use a multimeter to test each of the lid switches for continuity. If a lid switch does not have continuity, replace it. Cause 2 Door Lock Motor and Switch Assembly The door lock secures the washer door shut during operation. Once the washer door is closed, the washer can begin operating. If the washer door is not latched shut, the door switch prevents the washer from operating. If the door lock is defective, the washer may stop mid cycle. The door lock can fail either mechanically or electrically. Inspect the door lock for damage. If the door lock is damaged or does not latch properly, replace it. To determine if the door lock has failed electrically, consult your washer’s diagram and use a multimeter to test each of the door lock switches for continuity. If one of the switches does not have continuity, replace the switch. Cause 3 Water Inlet Valve During the rinse cycle, the water inlet valve opens to allow water to enter the wash tub. If the water inlet valve fails, the washer will continue waiting for the water to enter the washer, causing it to stop mid-cycle. To determine if the water inlet valve is defective, use a multimeter to test it for continuity. If the water inlet valve does not have continuity, replace it.
Try to take off the drain hose from the wash machine and take out(get rid off) the dusts or clots from the inside(hole) of the drain hose connection part of the machine(If necessary try after taking off the cover at the back of the machine).
