Chosen Solution
Hi my macbook screen goes black and I have to move the lcd screen with a little pressure to get it back to its normal condition ! at first it sometimes occured but right know when I turn my laptop on it is black and I have to move the LCD screen to be able to see the screen ! I think the problem is with inverter cable or inverter board . I need to know which one is not working and can I replace it by myself ?
Check for cuts and pinches - you may not need to replace it,
It sounds like the connection to the LCD is coming loose. But first clean both connectors the LCD, the logic-board and LVD cable. To start the connector on the logic-board doesn’t become loose that easy, so connect the LCD first and secured it. Then connect the logic board connector. If that doesn’t work try replace LVD cable and if that doesn’t work then the inverter is shot so you’ll need a new LCD. Hopefully it turns out to be a loose connection. Hope that helps. Good luck with that.
