Chosen Solution
Hello folks. I’m having some issues with my iPhone 4 that I recently purchased some replacement parts for. Here’s some background.. My LCD was cracked after a few untimely drops. The phone was still working until one final, fatal drop. The big CLUE I will say is this, about 3-4 days prior to the phone stopping working, the LCD would randomly turn off and would only come back on when the phone was plugged in (car charger/wall charger). This led me to believe it was a battery issue, but when I dropped it one last time, the phone no longer responded to anything. So, I purchased a few items. I bought a new LCD/Digitizer, new volume button/headphone cable, and a new home button (more issues with that as well). After hours of work, I had reassembled the phone and….No response. Am I dealing with a battery issue? Could there be another issue? After assembling, disassembling, re-assembling, I have no noticed anything visually/physically wrong. Please help. Opinions?
Hey Kyle, The fact that, even prior to the fatal drop, the phone only turned on while it was plugged in makes me think that there is a battery problem. I’d recommend trying to replace it. Hope this helps! Good luck!
I would also go back and check over your other replacement parts and ensure everything is hooked up right. Especially check the dock connections. You have probably assembled correctly but maybe havent pushed one of the cables right home.
Kyle, the problem you are having is the mother board is dead. If the phone is not turning on with or without the charger and you have replaced the Digitizer and LCD. There is only one other part that i can advise you to replace and that is the chargeing port but if that does not fix anything then like I said the mother board is dead.
