Chosen Solution
no audio and troubleshooter says no speakers have tested speakers in another machine all OK tested in rear outlet and front headphone socket but still no sound
Hi @jimwoodsa Since you have tried everything, perhaps you should go back and prove whether it is a hardware or a software fault. I realize that you have replaced the speakers etc. but it may be that the audio section on the motherboard has developed a problem. If it has then perhaps you can install a sound card to overcome the problem. Do a system image of your Win 10 installation to an external HDD and then reinstall Win 7 and see if the audio now works. This will prove, one way or the other, whether it is a hardware or a software problem.
You have to Install Latest Audio Drivers
Check BIOS settings for Audio, If on board is used, you must acquire drivers for the on board audio. Check Device manager for status of sound chip, you could try updating the sound devices right click on device and select update, if that fails you may have to go to the mfg., of the E-machine for the drivers. E-machines are a breed of their own so have fun. sisco here Update (02/08/2017) I am sorry for the advice I gave, I did not realize this was a win 10 install, what I would do is change out the MO BO that will accept win 10, or, if you can find a sound card that will accommodate win. 10 and fits your MoBo, that will help. good luck sisco
The same problem, my solution was uptaded the bios from here: https://global-download.acer.com/GDFiles…
