Chosen Solution
I have a Galaxy 10.5 (SM-T800) that I picked up to repair. It had no power when I bought it, battery was below 3 volts so I replaced that first. Left it to charge overnight and found that the battery’s voltage had not change. I can’t get it to power on at all, tried hard reset with the buttons (Power, Volume up, Home) and no response. Tried multiple chargers and cables they all work, swapped the motherboard with another SM-T800, though I can’t know if that one is any good either. What am I missing? Would it not turn on at all if the charging port is bad? I have a new charging port on its way but even so with a good battery at the right voltage it should turn right on. None of the water stickers show any evidence of water damage either. The screen is not cracked and it has basically no marks on it anywhere, so it probably wasn’t dropped. Any help or input would be really appreciated, thank you.
Turns out it was the charging port. I put in the new port, plugged it in and immediately got the charging screen and was able to turn it on.
That’s fantastic news for you Ant. Going to order a new charging port now, hopefully with the same result. Many thanks for your share of information.. Nige
i have the same problem,i did all what is suggested here but nothing is happening.is anyone with a schematic diagram i can use for reference, please post it. Thanks
Heb Ander problemem laad alleen op als tablet uit staat met Ander moederbord laad hij well op als hij aan staat wifi chip problem hoe to flashen???
