Chosen Solution
I have a macbook pro 13” retina early 2015. I have High Sierra already installed on it and want to upgrade my internal SSD with the OWC Aura Pro 1TB for more storage. I followed instructions and swapped the PCIe SSD. Got into recovery mode but from Disk Util and Terminal typing diskutil list. My new SSD does not appear. I the new SSD is inserted into the PCIe slot correctly and I should have the firmware since I am running 10.13.6 so any help as to why its not showing up for me to restore a time machine backup would be greatly appreciated. The only thing i can think of is the Aura SSD is damaged. I have since put my old SSD back in and to allow me to work.
Hi all … i am so sorry but i wasnt pressing option key just CMD + R so i am now in and restoring my new SSD. So giddy to have more storage. Thanks for being so responsive.
I had similar problem. After change disk on Aura Pro x2 not recognized by macbook. Till boot the machine using COMMAND+OPTION+R (helpdesk from OWC). Full instruction below: -Put the Aura Pro X2 into the machine. -Put the Apple drive into the enclosure (optional) -Boot the machine using COMMAND+OPTION+R (this is the specific key combo for High Sierra and above’s Recovery mode) -From there you should see the Aura Pro X2 in Disk Utility. -Erase/format the drive in APFS -Exit out to the main Recovery window -Then, you can install a fresh copy of the OS there in Recovery, and you can use Migration Assistant after it’s done, to move your data, OR -Restore from Time Machine back up
you have already inserted the disk now press the power button on and immediately after that hold down the “C” key on loading screen. navigate to the second page of the installation and here you can pull down a menu will appear. Now go to Disk Utilities to format the new drive GUID & Mac OS Extended. Now you can install the system while connecting to internet or by using a media bootable. Also check the specs on your new SSD drive to see if it backward compatible with the system or not.
I encountered similar issues with an Aura 2TB SSD in my Mid-2014 MacBook Pro Retina. Many painful steps later I 1. upgraded to Mojave on the old SSD; 2. Created a bootable USB with Mojave; 3. Moved the Aura 2TB to the Mac and the old Apple SSD to the Envoy enclosure; 4. booted (using Cmd-R) and then installed Mojave on the 2TB from the USB key; 5. replaced USB key with Envoy external drive, rebooted, and used Mac Migration to copy files from the Envoy (the old 500GB SSD). Before this I had tried (after step 4) to recover from a Time Machine backup I made but after 24 hours of TM in “Preparing Backup”, I cancelled this and went to the step 5 above. So far (fingers crossed!) I’ve been running 2 days on the Aura 2TB SSD with no problems.
Older Aura SSD don’t have the needed firmware on them to work correctly A Note on High Sierra Compatibility with Third Party SSD’s This SSD was sitting on the shelf awhile. Here’s the needed update to get your drive going: Aura SSDs: Firmware Update Once it’s working a second update will happen when you install High Sierra directly onto the SSD.
A bit of a fiasco for me because I wiped the drive before updating the firmware, since I didn’t realize it was going to be an issue. Both recovery methods wouldn’t work ( original OS or latest OS ). So I needed to get an old OS on the drive somehow. Short answer I booted the wiped laptop in target mode and Carbon Copy Clone an old OS onto the wiped drive. After that I had control of the machine again, which allowed me to run the firmware app. Long Answer: All other machines in the house are macOS 11 so I couldn’t clone any of those because the firmware app won’t run under macOS11. LAPTOP 1 ( with accidentally wiped OWC drive) power offpower up in Target mode ( boot while holding t key) LAPTOP 2 install vm fusioncreate a macOS 10.10 virtual machine 10.10 virtual machine mount external driveCarbon Copy Clone virtual drive to external drive (because virtual machine does not recognize Target Drives).unmount external drive LAPTOP 2 mount external drivemount Target drive (laptop1 — connect the two laptops via firewire) and check with disk utility that drive is External JournaledCarbon Copy Clone : external drive to target drive * LAPTOP 1 ( OWC drive) power off, to get out of target moderebootupdate OWC firmware
I have a similar issue Switched the SSD and migrated fine Then suddenly rebooted to black screen and now the aura refuses to boot or to respond to any key combo or so it seems.. just black screen after chime Prior to me switching back to the original drive to make sure that the SSD is the problem there was no chime now there is chime with the aura as well but nothing else
