Chosen Solution
Panasonic LCD TV TH-L24C20D Panasonic lcd 24 inch tv red light blinking continiuosly but the tv won’t turn so please any one help me ,how do i solve this problem
Hi, First try a power reset. Turn off the TV and then turn off and disconnect the TV power cord from the power outlet. Then press and hold (or turn on ) the TV’s power button (or switch) for 30 seconds and release. Reconnect the power cord to the power outlet and switch on the outlet. Turn on the TV and check if it starts OK. If that doesn’t work, switch off the TV and disconnect the power cord from the power outlet disconnect all the cables from the TV and remove the back cover from the TV. Check the power board (the one where the power cord connections go to) for domed, leaking or blown capacitors and also for possibly any other burnt out or heat stressed component. If unsure about a component take close up pictures of the component in question and post back here. Hopefully someone will be able to help you further. Here is a link that shows how to do that. Adding images to an existing question
Not very good advice taking the back off a TV if your untrained. Most red light blink as ppl say is caused though breakdown of the power unit relays. Not to be messed around by an amateur
Y board of your tv is problem If you can change the board if not you must repair (change damaged electronics part) if you can know witch one is damaged
I vacuumed the built up dust off the holes on the rear of the tv. It must have clogged the fan air intakes, so the tv was shutting down to stop it overheating and giving the blinking red light.
There is only two main boards on a Panasonic plasma 42” and the one with the mains flex going it to it I think is the problem but have been trying to get one but still can’t get a replacement.
Mine was blinking too. I tried to force start it by holding in the button for a few seconds. It turned on and instantly blew sparks out the back. It seems these TVs are $@$*.
